Did you try the settings in /etc/security/limits.conf suggested on the
Frinika
front page? (http://frinika.sourceforge.net). I noticed quite some
difference in delay for
Terratec Aureon 5.1 Fun cards using JavaSound.
Helge F.
On Wed, Jun 11, 2008 at 10:11 AM, Clemens Ladisch <[EMAIL PROTECTED]>
wrote:
> Alexander Carôt wrote:
> > 3.) Rather than using a double buffer for the playout wouldn't it be
> > possible to choose only one physical playout buffer and parse the
> > captured data in right at the interrupt.
>
> It's unlikely that any code could be fast enough to write the entire
> buffer before the hardware starts reading from the buffer; in fact, the
> hardware is likely to read the first sample from the buffer at the same
> time it is triggering the interrupt for the previous period.
>
> To reduce output latency, just reduce the output buffer size. For
> example, you could use a buffer with 128 samples (with 2 64-sample
> periods).
>
>
> HTH
> Clemens
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> Alsa-user mailing list
> Alsa-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-user
>
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user