De (from) (von) <[EMAIL PROTECTED]> :
> Another option is to upgrade to Lenny alltogether... Etch have
> got quite old now. Unless you have some good reasons to keep
> using it, perhaps it's better to switch over to Lenny, even if
> it have not been released yet... though running an unreleased
> distribution is not recommended for a newbie. ;-)
I'm on lenny now (2.6.24-1-686)
lspci -vvv give always
00:1b.0 Audio device: Intel Corporation Unknown device 293e (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device 829f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 15
Region 0: Memory at f9ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Note that on the asus web site it' written :
Realtek ALC 883, 8-channel High-Definition Audio CODEC
- Support Jack-Sensing, Enumeration, Multi-streaming
- Coaxial / Optical S/PDIF out ports at back I/O
Lenny don't solve the problem...Sure I have more options now :
in the Module snd-hda-intel section of
/usr/share/doc/linux-doc-2.6.24/Documentation/sound/alsa/ALSA-Configuration.txt.gz:
,----
| ALC883/888
| 3stack-dig 3-jack with SPDIF I/O
| 6stack-dig 6-jack digital with SPDIF I/O
| 3stack-6ch 3-jack 6-channel
| 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
| 6stack-dig-demo 6-jack digital for Intel demo board
| acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
| acer-aspire Acer Aspire 9810
| medion Medion Laptops
| medion-md2 Medion MD2
| targa-dig Targa/MSI
| targa-2ch-dig Targs/MSI with 2-channel
| laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
| lenovo-101e Lenovo 101E
| lenovo-nb0763 Lenovo NB0763
| lenovo-ms7195-dig Lenovo MS7195
| haier-w66 Haier W66
| 6stack-hp HP machines with 6stack (Nettle boards)
| 3stack-hp HP machines with 3stack (Lucknow, Samba boards)
| auto auto-config reading BIOS (default)
`----
But when I try the parameters (I use modconf to insert them) dmesg give :
snd_hda_intel: Unknown parameter `3stack-dig'
snd_hda_intel: Unknown parameter `6stack-dig'
snd_hda_intel: Unknown parameter `auto'
snd_hda_intel: Unknown parameter `3stack-6c'
snd_hda_intel: Unknown parameter `3stack-6ch-dig'
snd_hda_intel: Unknown parameter `6stack-dig-demo'
snd_hda_intel: Unknown parameter `acer'
snd_hda_intel: Unknown parameter `acer-aspire'
snd_hda_intel: Unknown parameter `medion'
snd_hda_intel: Unknown parameter `medion-md2'
snd_hda_intel: Unknown parameter `targa-dig'
snd_hda_intel: Unknown parameter `targa-2ch-dig'
snd_hda_intel: Unknown parameter `laptop-eapd'
snd_hda_intel: Unknown parameter `lenovo-101e'
snd_hda_intel: Unknown parameter `lenovo-nb0763'
snd_hda_intel: Unknown parameter `lenovo-ms7195'
snd_hda_intel: Unknown parameter `haier-w66'
snd_hda_intel: Unknown parameter `6stack-hp'
snd_hda_intel: Unknown parameter `3stack-hp'
snd_hda_intel: Unknown parameter `auto'
any clue ?
A lot of thanks
--
philippe
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
