On Mon, Apr 20, 2009 at 2:47 AM, Clemens Ladisch <cladi...@googlemail.com> wrote: > Paul Hartman wrote: >> On Fri, Apr 17, 2009 at 2:27 AM, Clemens Ladisch >> <cladi...@googlemail.com> wrote: >> > Phil Gorbett wrote: >> > > I am having difficulty getting the microphone(s) going with this >> > > monitor, and get the get the following results when I disable pulseaudio >> > > and run arecord: >> > > >> > > "arecord -v -f cd -D plughw:0 file.wav >> > > Recording WAVE 'file.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, >> > > Stereo >> > > ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not >> > > usable >> > > arecord: set_params:939: Broken configuration for this PCM: no >> > > configurations available" >> > >> > Please show the output of "lsusb -v" for this device. >> >> I'm not the OP but I have the same monitor and same problem. Here's >> the lsusb output for the microphone: >> >> http://pastebin.com/f4c340014 > > These descriptors claim it is a simple standard-compliant device. > > When you run that arecord command, is there any error message in the > system log (/var/log/messages, or the output of dmesg)?
Sorry for not replying. I actually had to send the monitor back because it developed 1152 stuck pixels (one vertical column) after just one month of use :-/ I got a replacement but have not set it up yet. Once I get it all attached I will be ready to give more info. Thanks. ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
