Hello.
Is there a way to open jackd with all 26 ins and 26 outs on M-AUDIO
ProFire 2626 with alsa backend? aplay see 2 devices, but I can use
either one or another at a time. One have 10 inputs and 10 outputs,
another have 16 inputs 16 outputs. So the driver knows about all I/O.
Can they be used at same time?
I have tried to specify io channels counts but jack wont start.
Main problem for me is to use 3 snd-dice devices together interconnected
via ADAT but actually record and playback only one of them. I still need
them connected to firewire bus to control internal mixers for direct
monitoring. FFADO is always opening devices in daisy-chain mode showing
all ports. This is causing sync issues and unstable playback. PipeWire
show all devices, but as separate nodes and its adding a huge 90ms delay
with ALSA backend. And I believe it performs some adaptive resampling on
the fly. So for now the only option I have is a second laptop with ffado
driver, it's working just fine when connected alone. But it's a bit
inconvenient.
Regadrs
Dmitry
_______________________________________________
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
