Hi Qin, Thanks for your answer, please see inline, Sabine
From: Qin Wu [mailto:[email protected]] Sent: lundi 13 mars 2017 08:07 To: Randriamasy, Sabine (Nokia - FR) <[email protected]>; IETF ALTO <[email protected]> Subject: RE: Introducing costs for wireless networks Hi, Sabine: Interesting topic, I think if this Cellular connection cost is needed? It should go to ALTO performance metric draft, right? [SR ] Yes, this would be a preferred placeholder. I also believe Cost value context is very valuable since it allows expose several value for a single metric. But this cost value context is technology specific? [SR ] Indeed, the utilized cost value context parameter is specific to the context in which the cost value is used. For instance: “uda”, “udna” is specific to LTE networks; “uplink”, “downlink” may apply to different technologies such as cellular, wifi and fixed. Or you want to have a generic schme for cost value context? [SR ] yes, a generic scheme is specified in [draft-randriamasy-alto-cost-context] to use context parameters in conjunction with costs. This scheme applies to any technology that would need it. The current draft proposes use cases for wireless networks but is not restricted to. Other use cases are more than welcome. In addition, I want to know whether Celluar costs is used to measure cell congestion or cell load? [SR ] there can be several metrics for cellular networks, including cell congestion, cell load and others. Again any proposal is welcome. How do you measure it in the wireless networks? Is there any 3GPP specification we can reference? [SR ] it depends on the metrics. The metric values may be inferred from aggregated measurements but not only. They may also involve non-measured ingredients reflecting e.g. policy, may be unitless or not. -Qin 发件人: alto [mailto:[email protected]] 代表 Randriamasy, Sabine (Nokia - FR) 发送时间: 2017年3月10日 21:30 收件人: IETF ALTO 主题: [alto] Introducing costs for wireless networks Hi all, Any thoughts in the WG on the following? Thanks, Sabine Pursuant to previous ALTO work on wireless networks and relating to the WG item on ALTO metrics, there are a number of abstracted metrics reporting on cellular and wireless networks worth considering. For instance, applications on UEs may like to know about the connection costs associated to the cells it is likely to connect to. These costs may for instance be impacted by the cell load, see section 2.1 of [draft-randriamasy-alto-cost-context]. Using cellular costs requires introducing a new address type and a new identifier namespace for cells. Based on 3GPP standards, we may opt for the name space "ECGI" and the related address format as suggested in section 4 of [draft-rauschenbach-alto-wireless-access] that also proposes that to map cells to PIDs covering cell IDs. Cellular connection costs (CCC for short) can be conveyed by for instance the (Filtered) Cost Map (FCM) service or an extension of the Endpoint Property (EPS) that could be added to [draft-roome-alto-unified-props]. A PID in a Network Map can cover a cell with an address from the address space "ECGI". A PID thus hides the underlying technical aspects. The CCC in a F/CM between a UE and a cell/PID can be encoded in the bi-directional, uplink and downlink directions, within or across PIDs. A UE can retrieve its “serving PID” via the Endpoint Property "PID" applied to its service cell ID.
_______________________________________________ alto mailing list [email protected] https://www.ietf.org/mailman/listinfo/alto
