Config version: 1.18 Main deploy: 500 meters Apogee delay: 0 seconds Apogee lockout: 0 seconds Frequency: 434350 Callsign: "KD0FTK" Radio enable: 1 Radio cal: 7119365 Accel cal +1g: 2033 -1g: 2070 IMU cal along -6 across 11 through 18 Pad orientation: 1 Max flight log: 2048 kB Ignite mode: 0 Pyro-count: 4 Pyro 0: f>= 6 D d 300 Pyro 1: <disabled> Pyro 2: <disabled> Pyro 3: <disabled> Pyro time: 5 APRS interval: 5 Beeper setting: 94 ms5607 reserved: 160 ms5607 sens: 46688 ms5607 off: 40967 ms5607 tcs: 29337 ms5607 tco: 25847 ms5607 tref: 31879 ms5607 tempsens: 27945 ms5607 crc: 15661
Andrew Wimmer Department of Electrical Engineering-MS 2015 University of California, Los Angeles MIT Aero/Astro 2012 On Mon, Jul 21, 2014 at 8:13 AM, Bdale Garbee <[email protected]> wrote: > Andrew Wimmer <[email protected]> writes: > > > Any ideas? > > The flakiness coming up in pad mode when oriented antenna-up and the > fact that you had it in pad mode when horizontal makes me think that > either you've got it configured for antenna-down (check the configure > altimeter tab settings), or something is wonky with the Z-axis > accel calibration on that board. If you can use a terminal program to > talk to the board over USB, a 'c s' will display the current cal > values... share those with us and we can tell you if they look "normal" > or messed up somehow. > > Bdale >
_______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
