Thanks Bdale, I'll definitely be twisting all the wire pairs per the manual - which I actually did read ;-)
With he electronics on the one side I have room for both lipos on the other side with the switches and the bulk of the wiring. I'll post when I get it all together. - Scott On Sep 23, 2014, at 2:00 PM, [email protected] wrote: > Send altusmetrum mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.gag.com/mailman/listinfo/altusmetrum > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of altusmetrum digest..." > > > Today's Topics: > > 1. Any problems putting a TeleMega and an EasyMini close > together? (Scott Mcintosh) > 2. Re: Any problems putting a TeleMega and an EasyMini close > together? (Bdale Garbee) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 22 Sep 2014 22:30:39 -0400 > From: Scott Mcintosh <[email protected]> > To: [email protected] > Subject: [altusmetrum] Any problems putting a TeleMega and an EasyMini > close together? > Message-ID: <[email protected]> > Content-Type: text/plain; charset=us-ascii > > I am trying to get both on the same smallish sled. So I have two questions: > > 1) Do I need to worry about interference? I'm hoping I don't have to add any > shielding. > > 2) Is there any actual alignment for the EasyMini? I want to mount it > sideways to make room, and since it doesn't have an accelerometer I though it > should be fine (I only as because the mounting hole template does indicate an > "up", > > I put pictures of the layout here: > https://www.flickr.com/photos/96008345@N03/sets/72157647912735571 > > Any advise would be greatly appreciates as I'm really excited about the > products and hope to get something in the air for my L2 cert flight. > > Thanks, > Scott > > > > ------------------------------ > > Message: 2 > Date: Mon, 22 Sep 2014 21:43:00 -0600 > From: Bdale Garbee <[email protected]> > To: Scott Mcintosh <[email protected]>, [email protected] > Subject: Re: [altusmetrum] Any problems putting a TeleMega and an > EasyMini close together? > Message-ID: <[email protected]> > Content-Type: text/plain; charset="us-ascii" > > Scott Mcintosh <[email protected]> writes: > >> I am trying to get both on the same smallish sled. So I have two questions: >> >> 1) Do I need to worry about interference? I'm hoping I don't have to >> add any shielding. > > Should be fine. Make sure you twist wire lead pairs, particularly to > power switches. > >> 2) Is there any actual alignment for the EasyMini? I want to mount it >> sideways to make room, and since it doesn't have an accelerometer I >> though it should be fine (I only as because the mounting hole template >> does indicate an "up", > > You are correct that any orientation is fine for EasyMini since it has > no accel. > >> I put pictures of the layout here: >> https://www.flickr.com/photos/96008345@N03/sets/72157647912735571 > > Looks workable! > > Bdale > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: not available > Type: application/pgp-signature > Size: 810 bytes > Desc: not available > URL: > <http://lists.gag.com/pipermail/altusmetrum/attachments/20140922/d328de5f/attachment-0001.sig> > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > altusmetrum mailing list > [email protected] > http://lists.gag.com/mailman/listinfo/altusmetrum > > > ------------------------------ > > End of altusmetrum Digest, Vol 46, Issue 15 > ******************************************* _______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
