The VX-8GR will only receive Packet data on the B VFO. Which one are
you using. I'm pretty sure that the TeleGPS transmits APRS at 1200
Baud not 9600.
Terry
On 8/17/2019 8:51 PM, Bryce Chanes wrote:
I have a TeleGPS (V1.0) that I can not get my Yaesu VX-8GR to decode
for the life of me. I have attached videos with sound from my SDR
using SDR# showing the TeleGPS output and my BigRedBee GPS. (Note the
BRB is in 1200Baud and the TeleGPS is at 9600Baud)
I have properly setup up the built in TNC on the radio to switch
between 1200 and 9600baud respectively, but that does not show any
signs of working. I have tried both uncompressed and compressed APRS
formats, to no avail. Tried different frequencies as well as
offsetting my receive frequency since I didn't find the RF calibration
instructions in the reference Appendix from the manual.
Any assistance would be appreciated.
Thank you.
Bryce Chanes
KR0CKT (Kay-Rocket)
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
