I get an error when I try to run the AltosUI after installing 1.9.5.
Tried twice with the same results.
Terry
On 9/30/2020 12:52 AM, Keith Packard wrote:
Altus Metrum announces AltOS 1.9.5
Announcing AltOS 1.9.5
Firmware Changes:
* Add Booster mode for all dual-deploy altimeters. Select
"Separation & Apogee" mode in AltosUI to fire the 'main' channel
at first motor burnout and the 'apogee' channel at apogee.
* Improve reliability of stm32l firmware under heavy load. This was
found using Monitor Idle on TeleMega with all flash slots full of
data which would occasionally lock up.
* Fix orientation label in AltosUI for devices with radios. This
makes the orientation say 'Antenna up' and 'Antenna Down' for
TeleMetrum and TeleMega again.
* Fix log data for pyro channels which were inhibited (often because
of a tilt limit). They used to report 'fired' as soon as they were
inhibited, which was misleading. Now they never report as having
been fired.
* Allow Igniter Test to fire each igniter more than once.
AltosUI Changes:
* Improve performance of Monitor Idle mode by sending less data for
each update.
* Improve Mac OS X install scripts so that they work on
Catalina. This involves sending the user to get Java from the
AdoptOpenJDK project which provides a version that works with Java
applications.
* Make larger dialogs scrollable for use on smaller screens.
* Fix troubles re-flashing EasyMega boards running older firmware.
* Add TeleMetrum v3.0 firmware to the Windows AltosUI packages.
Read more about AltOS here:
https://altusmetrum.org/AltOS/
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
