Yes, you need either a switch or a jumper connected to the Switch terminals.
https://altusmetrum.org/AltOS/doc/altusmetrum.html#_hooking_up_a_power_switch Mark On Tue, Apr 6, 2021 at 10:46 AM AlbyVA <[email protected]> wrote: > > > Jesse: > > I assume you mean these two ports need to be bridged if so don't have a > switch connected (See Attached Picture)? > > > > > > On Tue, Apr 6, 2021, 10:25 AM Jesse Frey <[email protected]> wrote: > >> The switch opera are between the battery and the altimeter, you need to >> connect them to power it up. >> >> On Tue, Apr 6, 2021, 8:22 AM AlbyVA <[email protected]> wrote: >> >>> >>> >>> I just received my Altus Metrum v3 and I'm a first time user. I hooked >>> up a 3.7v 2000mAh LiPo and nothing happened. No beeps, no nothing. I >>> verified the positive/negative was correct, but still nothing. >>> >>> Now I know my battery is good and charged because when I connected a >>> USB to the Metrum, it charged my battery until the LED turned green. Am I >>> missing something? Do I need to bridge the switch ports for it to work Off >>> Pad? >>> >>> Thanks, >>> Alby >>> _______________________________________________ >>> altusmetrum mailing list >>> [email protected] >>> http://lists.gag.com/mailman/listinfo/altusmetrum >>> >> _______________________________________________ >> altusmetrum mailing list >> [email protected] >> http://lists.gag.com/mailman/listinfo/altusmetrum >> > _______________________________________________ > altusmetrum mailing list > [email protected] > http://lists.gag.com/mailman/listinfo/altusmetrum >
_______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
