Here's more info on the changer:
____________________________________________________________
from dmesg:
(scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI 1/10/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 392 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.30/3.2.4
<Adaptec AIC-7892 Ultra 160/m SCSI host adapter>
scsi : 1 host.
(scsi0:0:1:0) Synchronous at 80.0 Mbyte/sec, offset 32.
Vendor: ECRIX Model: VXA-1 Rev: 2524
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: SPECTRA Model: 215 Rev: 1008
Type: Medium Changer ANSI SCSI revision: 02
Detected scsi generic sg1 at scsi0, channel 0, id 3, lun 0
st: bufsize 32768, wrt 30720, max buffers 5, s/g segs 16.
Detected scsi tape st0 at scsi0, channel 0, id 1, lun 0
The autopak configuration by default emulates Spectra 215
It is also capable of being set as:
Spectra 10000, Exabyte EXB210, and Spectra 4000
on the changer side. It can also operate in stacker mode, sequentially.
It seems possible that mtx would operate this changer more
effectively (and transparently) than chg-scsi...
I am also not entirely clear on how amanda tracks tapes and slots.
tapelist seems very specific to a configuration
labelfile databases barcode-tape associations, but doesn't track slots.
tape0-slot only tracks the actual location currently...
Right now I have four configurations (daily, full, offsite, and laptops)
backing up linux only.
These files are in /usr/local/etc/amanda/<config>, each with it's own
amanda.conf and disklist
(as I finish the details of this implementation, I think I will move the
common elements out of the individual
config files and into /usr/local/etc/amanda/amanda.conf.main).
The tape files (tape0-slot, tape0-clean, tapestatus) labelfile and
changer.conf files are at /usr/local/etc/amanda and are
shared among all the configs.
_____________________________________________________________________
and the contents of chg-scsi.debug:
______________________________________________________________________
chg-scsi: debug 1 pid 775 ruid 29 euid 29 start time Wed Jan 24 10:56:03 2001
ARG [0] : /usr/local/libexec/chg-scsi
ARG [1] : -slot
ARG [2] : next
Number of configurations: 1
Tapes need eject: No
Tapes need sleep: 120 seconds
Cleancycles : 100
Changerdevice : /dev/sg1
Labelfile : /usr/local/etc/amanda/labelfile
Tapeconfig Nr: 0
Drivenumber : 0
Startslot : 0
Endslot : 14
Cleanslot : 14
Devicename : /dev/nst0
changerident : none
SCSITapedev : /dev/sg1
tapeident : none
statfile : /usr/local/etc/amanda/tapestatus
Slotfile : /usr/local/etc/amanda/tape0-slot
Cleanfile : /usr/local/etc/amanda/tape0-clean
Usagecount : /usr/local/etc/amanda/totaltime
##### START OpenDevice
OpenDevice : /dev/sg1
SCSI_OpenDevice : use SG interface
SCSI_OpenDevice : current timeout 6000
SCSI_OpenDevice : timeout set to 60000
##### START SCSI_Inquiry
SCSI_Inquiry start length = 56:
##### START DecodeSCSI
SCSI_ExecuteCommand : INQUIRY 12 00 00 00 38 00
##### STOP DecodeSCSI
08 80 02 02 33 00 00 00 53 50 45 43 54 52 41 20 ....3...SPECTRA.
32 31 35 20 20 20 20 20 20 20 20 20 20 20 20 20 215.............
31 30 30 38 41 52 00 00 00 00 00 00 00 00 00 00 1008AR..........
00 00 00 00 00 00 00 01
SCSI_Inquiry : end 0
##### START PrintInquiry
qualifier 0
type 8
data_format 2
ansi_version 2
ecma_version 0
iso_version 0
type_modifier 0
removable 1
vendor_info SPECTRA
prod_ident 215
prod_version 1008
vendor_specific AR
using ident = 215, type = Spectra Logic TreeFrog[215]
##### START OpenDevice
OpenDevice : /dev/nst0
SCSI_OpenDevice : checking if /dev/nst0 is a sg device
No link /dev/nst0
using ident = generic, type = Generic driver tape/robot [generic]
##### START OpenDevice
OpenDevice : /dev/sg1
SCSI_OpenDevice : use SG interface
SCSI_OpenDevice : current timeout 6000
SCSI_OpenDevice : timeout set to 60000
##### START SCSI_Inquiry
SCSI_Inquiry start length = 56:
##### START DecodeSCSI
SCSI_ExecuteCommand : INQUIRY 12 00 00 00 38 00
##### STOP DecodeSCSI
08 80 02 02 33 00 00 00 53 50 45 43 54 52 41 20 ....3...SPECTRA.
32 31 35 20 20 20 20 20 20 20 20 20 20 20 20 20 215.............
31 30 30 38 41 52 00 00 00 00 00 00 00 00 00 00 1008AR..........
00 00 00 00 00 00 00 01
SCSI_Inquiry : end 0
##### START PrintInquiry
qualifier 0
type 8
data_format 2
ansi_version 2
ecma_version 0
iso_version 0
type_modifier 0
removable 1
vendor_info SPECTRA
prod_ident 215
prod_version 1008
vendor_specific AR
using ident = 215, type = Spectra Logic TreeFrog[215]
###### START get_drive_count
get_drive_count : fd 9
##### START GenericElementStatus
##### START SCSI_ModeSense
SCSI_ModeSense start length = 255:
##### START DecodeSCSI
SCSI_ExecuteCommand : MODE SENSE 1A 08 3F 00 FF 00
##### STOP DecodeSCSI
SCSI_ModeSense end: 0
##### START DecodeModeSense
41 00 00 00 9D 12 00 56 00 01 00 00 00 0F 00 00 A......V........
00 00 00 52 00 01 00 00 1E 02 00 00 1F 0E 0B 00 ...R............
0A 0B 00 0B 00 00 00 00 00 00 00 00 1C 0A 00 00 ................
00 00 00 00 00 00 00 00 80 08 03 00 00 00 00 00 ................
00 00 00 00 10 00 00 00 3E 04 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 FF FF FF FF ................
00 6E 6F 74 20 73 74 72 69 70 70 65 64 00 00 00 .not.stripped...
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 3D 0A 00 00 83 01 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 FF FF FF FF 00 43 4F 46 .............COF
46 20 66 6F 72 6D 61 74 20 61 6C 70 68 61 00 00 F.format.alpha..
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
buffer length = 61
DecodeModeSense : Element Address Assignment Page
Medium Transport Element Address 86
Number of Medium Transport Elements 1
First Storage Element Address 0
Number of Storage Elements 15
First Import/Export Element Address 0
Number of ImportExport Elements 0
First Data Transfer Element Address 82
Number of Data Transfer Elements 1
DecodeModeSense : MT can store data cartridges 1
DecodeModeSense : ST can store data cartridges 1
DecodeModeSense : IE can store data cartridges 0
DecodeModeSense : DT can store data cartridges 1
DecodeModeSense : MT to MT 0
DecodeModeSense : MT to ST 1
DecodeModeSense : MT to IE 0
DecodeModeSense : MT to DT 1
DecodeModeSense : ST to MT 1
DecodeModeSense : ST to MT 1
DecodeModeSense : ST to DT 1
DecodeModeSense : IE to MT 0
DecodeModeSense : IE to ST 0
DecodeModeSense : IE to ST 0
DecodeModeSense : IE to ST 0
DecodeModeSense : DT to MT 1
DecodeModeSense : DT to ST 1
DecodeModeSense : DT to IE 0
DecodeModeSense : DT to DT 1
##### START BarCode
BarCode : fd 9
Ident = [215], function = [215]
##### START TreeFrogBarCode
##### START SCSI_ModeSense
SCSI_ModeSense start length = 255:
##### START DecodeSCSI
SCSI_ExecuteCommand : MODE SENSE 1A 00 3F 00 FF 00
##### STOP DecodeSCSI
SCSI_ModeSense end: 0
##### START DecodeModeSense
41 00 00 00 9D 12 00 56 00 01 00 00 00 0F 00 00 A......V........
00 00 00 52 00 01 00 00 1E 02 00 00 1F 0E 0B 00 ...R............
0A 0B 00 0B 00 00 00 00 00 00 00 00 1C 0A 00 00 ................
00 00 00 00 00 00 00 00 80 08 03 00 00 00 00 00 ................
00 00 00 00 10 00 00 00 3E 04 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 FF FF FF FF ................
00 6E 6F 74 20 73 74 72 69 70 70 65 64 00 00 00 .not.stripped...
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 3D 0A 00 00 83 01 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 FF FF FF FF 00 43 4F 46 .............COF
46 20 66 6F 72 6D 61 74 20 61 6C 70 68 61 00 00 F.format.alpha..
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
buffer length = 61
DecodeModeSense : Element Address Assignment Page
Medium Transport Element Address 86
Number of Medium Transport Elements 1
First Storage Element Address 0
Number of Storage Elements 15
First Import/Export Element Address 0
Number of ImportExport Elements 0
First Data Transfer Element Address 82
Number of Data Transfer Elements 1
DecodeModeSense : MT can store data cartridges 1
DecodeModeSense : ST can store data cartridges 1
DecodeModeSense : IE can store data cartridges 0
DecodeModeSense : DT can store data cartridges 1
DecodeModeSense : MT to MT 0
DecodeModeSense : MT to ST 1
DecodeModeSense : MT to IE 0
DecodeModeSense : MT to DT 1
DecodeModeSense : ST to MT 1
DecodeModeSense : ST to MT 1
DecodeModeSense : ST to DT 1
DecodeModeSense : IE to MT 0
DecodeModeSense : IE to ST 0
DecodeModeSense : IE to ST 0
DecodeModeSense : IE to ST 0
DecodeModeSense : DT to MT 1
DecodeModeSense : DT to ST 1
DecodeModeSense : DT to IE 0
DecodeModeSense : DT to DT 1
TreeFrogBarCode : EBARCO 1
TreeFrogCheckSum : CHKSUM 1
08 80 02 02 33 00 00 00 53 50 45 43 54 52 41 20 ....3...SPECTRA.
32 31 35 20 20 20 20 20 20 20 20 20 20 20 20 20 215.............
31 30 30 38 41 52 00 00 00 00 00 00 00 00 00 00 1008AR..........
00 00 00 00 00 00 00 01
##### START SCSI_ReadElementStatus
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 11 00 56 00 01 00 00 00 08 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (1) SCSI_ExecuteCommand 0
SCSI_ReadElementStatus: DataBufferLength 44, ret 0
00 56 00 01 00 00 00 3C
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 11 00 56 00 01 00 00 00 44 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (2) SCSI_ExecuteCommand 0
00 56 00 01 00 00 00 3C 01 80 00 34 00 00 00 34 .V.........4...4
00 56 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .V..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00
##### START BarCode
BarCode : fd 9
Ident = [215], function = [215]
##### START TreeFrogBarCode
##### START SCSI_ModeSense
SCSI_ModeSense start length = 255:
##### START DecodeSCSI
SCSI_ExecuteCommand : MODE SENSE 1A 00 3F 00 FF 00
##### STOP DecodeSCSI
SCSI_ModeSense end: 0
##### START DecodeModeSense
41 00 00 00 9D 12 00 56 00 01 00 00 00 0F 00 00 A......V........
00 00 00 52 00 01 00 00 1E 02 00 00 1F 0E 0B 00 ...R............
0A 0B 00 0B 00 00 00 00 00 00 00 00 1C 0A 00 00 ................
00 00 00 00 00 00 00 00 80 08 03 00 00 00 00 00 ................
00 00 00 00 10 00 00 00 3E 04 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 FF FF FF FF ................
00 6E 6F 74 20 73 74 72 69 70 70 65 64 00 00 00 .not.stripped...
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 3D 0A 00 00 83 01 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 FF FF FF FF 00 43 4F 46 .............COF
46 20 66 6F 72 6D 61 74 20 61 6C 70 68 61 00 00 F.format.alpha..
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
buffer length = 61
DecodeModeSense : Element Address Assignment Page
Medium Transport Element Address 86
Number of Medium Transport Elements 1
First Storage Element Address 0
Number of Storage Elements 15
First Import/Export Element Address 0
Number of ImportExport Elements 0
First Data Transfer Element Address 82
Number of Data Transfer Elements 1
DecodeModeSense : MT can store data cartridges 1
DecodeModeSense : ST can store data cartridges 1
DecodeModeSense : IE can store data cartridges 0
DecodeModeSense : DT can store data cartridges 1
DecodeModeSense : MT to MT 0
DecodeModeSense : MT to ST 1
DecodeModeSense : MT to IE 0
DecodeModeSense : MT to DT 1
DecodeModeSense : ST to MT 1
DecodeModeSense : ST to MT 1
DecodeModeSense : ST to DT 1
DecodeModeSense : IE to MT 0
DecodeModeSense : IE to ST 0
DecodeModeSense : IE to ST 0
DecodeModeSense : IE to ST 0
DecodeModeSense : DT to MT 1
DecodeModeSense : DT to ST 1
DecodeModeSense : DT to IE 0
DecodeModeSense : DT to DT 1
TreeFrogBarCode : EBARCO 1
TreeFrogCheckSum : CHKSUM 1
08 80 02 02 33 00 00 00 53 50 45 43 54 52 41 20 ....3...SPECTRA.
32 31 35 20 20 20 20 20 20 20 20 20 20 20 20 20 215.............
31 30 30 38 41 52 00 00 00 00 00 00 00 00 00 00 1008AR..........
00 00 00 00 00 00 00 01
##### START SCSI_ReadElementStatus
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 12 00 00 00 0F 00 00 00 08 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (1) SCSI_ExecuteCommand 0
SCSI_ReadElementStatus: DataBufferLength 31C, ret 0
00 00 00 0F 00 00 03 14
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 12 00 00 00 0F 00 00 03 1C 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (2) SCSI_ExecuteCommand 0
00 00 00 0F 00 00 03 14 02 80 00 34 00 00 03 0C ...........4....
00 00 09 00 00 00 00 00 00 80 00 52 30 30 30 30 ...........R0000
30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 01 09 00 00 00 00 00 00 80 00 52 ...............R
30 30 30 30 30 31 00 00 00 00 00 00 00 00 00 00 000001..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 02 08 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 03 09 00 ................
00 00 00 00 00 00 00 00 30 30 30 30 30 33 00 00 ........000003..
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 04 09 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 05 09 00 00 00 00 00 00 00 00 00 ................
30 30 30 30 30 39 00 00 00 00 00 00 00 00 00 00 000009..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 06 08 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 07 08 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 08 09 00 00 00 00 00 00 00 00 00 30 30 30 30 ............0000
31 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 09 09 00 00 00 00 00 00 00 00 00 ................
30 30 30 30 31 31 00 00 00 00 00 00 00 00 00 00 000011..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 0A 09 00 00 00 00 00 ................
00 00 00 00 30 30 30 30 31 32 00 00 00 00 00 00 ....000012......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 0B 09 00 ................
00 00 00 00 00 00 00 00 30 30 30 30 31 33 00 00 ........000013..
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 0C 09 00 00 00 00 00 00 00 00 00 30 30 30 30 ............0000
34 35 00 00 00 00 00 00 00 00 00 00 00 00 00 00 45..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 0D 09 00 00 00 00 00 00 00 00 00 ................
30 30 30 30 34 36 00 00 00 00 00 00 00 00 00 00 000046..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 0E 09 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00
##### START BarCode
BarCode : fd 9
Ident = [215], function = [215]
##### START TreeFrogBarCode
##### START SCSI_ModeSense
SCSI_ModeSense start length = 255:
##### START DecodeSCSI
SCSI_ExecuteCommand : MODE SENSE 1A 00 3F 00 FF 00
##### STOP DecodeSCSI
SCSI_ModeSense end: 0
##### START DecodeModeSense
41 00 00 00 9D 12 00 56 00 01 00 00 00 0F 00 00 A......V........
00 00 00 52 00 01 00 00 1E 02 00 00 1F 0E 0B 00 ...R............
0A 0B 00 0B 00 00 00 00 00 00 00 00 1C 0A 00 00 ................
00 00 00 00 00 00 00 00 80 08 03 00 00 00 00 00 ................
00 00 00 00 00 01 09 00 00 00 00 00 00 80 00 52 ...............R
30 30 30 30 30 31 00 00 00 00 00 00 00 00 00 00 000001..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 02 08 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 03 09 00 ................
00 00 00 00 00 00 00 00 30 30 30 30 30 33 00 00 ........000003..
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 04 09 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
buffer length = 61
DecodeModeSense : Element Address Assignment Page
Medium Transport Element Address 86
Number of Medium Transport Elements 1
First Storage Element Address 0
Number of Storage Elements 15
First Import/Export Element Address 0
Number of ImportExport Elements 0
First Data Transfer Element Address 82
Number of Data Transfer Elements 1
DecodeModeSense : MT can store data cartridges 1
DecodeModeSense : ST can store data cartridges 1
DecodeModeSense : IE can store data cartridges 0
DecodeModeSense : DT can store data cartridges 1
DecodeModeSense : MT to MT 0
DecodeModeSense : MT to ST 1
DecodeModeSense : MT to IE 0
DecodeModeSense : MT to DT 1
DecodeModeSense : ST to MT 1
DecodeModeSense : ST to MT 1
DecodeModeSense : ST to DT 1
DecodeModeSense : IE to MT 0
DecodeModeSense : IE to ST 0
DecodeModeSense : IE to ST 0
DecodeModeSense : IE to ST 0
DecodeModeSense : DT to MT 1
DecodeModeSense : DT to ST 1
DecodeModeSense : DT to IE 0
DecodeModeSense : DT to DT 1
TreeFrogBarCode : EBARCO 1
TreeFrogCheckSum : CHKSUM 1
08 80 02 02 33 00 00 00 53 50 45 43 54 52 41 20 ....3...SPECTRA.
32 31 35 20 20 20 20 20 20 20 20 20 20 20 20 20 215.............
31 30 30 38 41 52 00 00 00 00 00 00 00 00 00 00 1008AR..........
00 00 00 00 00 00 00 01
##### START SCSI_ReadElementStatus
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 14 00 52 00 01 00 00 00 08 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (1) SCSI_ExecuteCommand 0
SCSI_ReadElementStatus: DataBufferLength 44, ret 0
00 52 00 01 00 00 00 3C
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 14 00 52 00 01 00 00 00 44 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (2) SCSI_ExecuteCommand 0
00 52 00 01 00 00 00 3C 04 80 00 34 00 00 00 34 .R.........4...4
00 52 09 00 00 00 30 01 00 80 00 02 30 30 30 30 .R....0.....0000
30 32 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00
Media Transport Elements (robot arms) :
Element #0086 E
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 1 From = -001
TAG =
Storage Elements (Media slots) :
Element #0000 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0082
TAG = 000000
Element #0001 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0082
TAG = 000001
Element #0002 E
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0003 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG = 000003
Element #0004 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0005 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG = 000009
Element #0006 E
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0007 E
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0008 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG = 000010
Element #0009 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG = 000011
Element #0010 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG = 000012
Element #0011 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG = 000013
Element #0012 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG = 000045
Element #0013 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG = 000046
Element #0014 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Data Transfer Elements (tape drives) :
Element #0082 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 4 From = 0002
TAG = 000002
SCSI ADDRESS = 1
Import/Export Elements :
###### START drive_loaded
drive_loaded : fd 9 drivenum 0
###### START unload
unload : fd 9, slot 2, drive 0
unload : unload drive 0[82] slot 2[2]
##### START GenericMove
GenericMove : from = 82, to = 2
##### START LogSense
##### START SCSI_TestUnitReady
##### START DecodeSCSI
SCSI_ExecuteCommand : TEST UNIT READY 00 00 00 00 00 00
##### STOP DecodeSCSI
##### START GenericRewind
##### START DecodeSCSI
SCSI_ExecuteCommand : REWIND 01 01 00 00 00 00
##### STOP DecodeSCSI
##### START DecodeSense
GenericRewind : Sense Keys
ErrorCode 70
Valid 1
ASC 20
ASCQ 00
Sense key 05
Illegal Request
##### START SCSI_TestUnitReady
##### START DecodeSCSI
SCSI_ExecuteCommand : TEST UNIT READY 00 00 00 00 00 00
##### STOP DecodeSCSI
GenericRewind : Ready after 0 sec, true = 0
LogSense
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 40 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 41 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 6E 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 70 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 71 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 73 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 75 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 77 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 78 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 52 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 41 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 60 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START LookupElement
##### STOP LookupElement (DTE)
##### START LookupElement
##### STOP LookupElement (STE)
CheckMove : checking if move from 82 to 2 is legal
CheckMove : DT2ST
##### START SCSI_Move
##### START DecodeSCSI
SCSI_ExecuteCommand : MOVE MEDIUM A5 00 00 00 00 52 00 02 00 00 00 00
##### STOP DecodeSCSI
______________________________________________________________________
At 05:14 PM 1/23/2001 -0500, you wrote:
> >1. tape device or changer issue? ...
>
>I'd strongly suspect a problem with the changer code rather than with
>the drive.
>
> >At the end of this I'll place the amanda.conf and changer.conf files...
>
>I suspect we also need to see /tmp/amanda/changer*debug. That's where
>all the good stuff is :-).
>
> >2. Timing issue? Is there a parameter in the changer.conf that could be
> >set to eliminate this? An edit that could be made in the source code?
>
>Yes. Let us know when you find it :-).
>
> >I've also had the changer hang hard when an amanda job failed and aborted
> >because of a config file error. ...
>
>Posting the matching /tmp/amanda/changer*debug file that matches is
>probably the best way to proceed.
>
> >--doug
>
>John R. Jackson, Technical Software Specialist, [EMAIL PROTECTED]
Doug Munsinger
egenera, Inc.
[EMAIL PROTECTED]
563 Main Street, Bolton, MA 01740
Tel: 508-786-9444 ext. 2612
OR 508-481-5493
fax: 978 779-9730
