I have a Slack 7.1 (2.2.18) setup with an Adic 7000 22-tape library. Did a
clean make and install and am trying to get the tape controller to work.
Should I be using chg-scsi or chg-zd-mtx? chg-scsi doesn't seem to like
all 22 of the media slots ( see below -- note the "-1" on slots 8,9,10 ).
Plus, it hasn't been loading the correct elements. Ie. "slot 19" gives me
slot 2 instead... etc. etc... I think I should be changing to zd-mtx, yes?
If anyone has a similar setup, please drop me a note...
Storage Elements (Media slots) :
Element #0001 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0001
TAG =
Element #0002 E
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0003 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0003
TAG =
Element #0004 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0004
TAG =
Element #0005 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0005
TAG =
Element #0006 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0006
TAG =
Element #0007 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0007
TAG =
Element #0008 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0009 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0010 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0011 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0011
TAG =
Element #0012 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0001
TAG =
Element #0013 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0002
TAG =
Element #0014 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0003
TAG =
Element #0015 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0004
TAG =
Element #0016 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0005
TAG =
Element #0017 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0006
TAG =
Element #0018 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0007
TAG =
Element #0019 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0008
TAG =
Element #0020 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0001
TAG =
Element #0021 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0010
TAG =
Element #0022 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0001
TAG =
Data Transfer Elements (tape drives) :
Element #0082 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 4 From = 0002
TAG =
SCSI ADDRESS = 5
...
--
http://www.mchang.org/
http://decss.zoy.org/
- Re: Newbie question (linux + ADIC FastStor 7000) Mark L. Chang
- Re: Newbie question (linux + ADIC FastStor 7000) Thomas Hepper
- Re: Newbie question (linux + ADIC FastStor 7000) Mark L. Chang
