>This happens after tapetype runs for 5 or so hours. ...
>Error as follows: ahc1 target 4 synchronous at 10.0mghz, offset = 0xf
That's not an error message. It's just information about the transfer
rate.
>Tapetype could not rewind /dev/nst0 Input/Output error . ...
>Mt �f /dev/nst0 rewind does not seem to work until a reboot.
That's got to be a hardware or driver problem. I'd start working down
the usual suspects:
* Drive configuration (e.g. DIP switches).
* Termination.
* Cable.
* Connections.
* Reseating boards.
* Your OS vendor (latest driver)
>Will
John R. Jackson, Technical Software Specialist, [EMAIL PROTECTED]
