Hi ,
i am a newbie in amanda , and have installed amanda 2.4.2p2 sometime
back . After compilation and configuration , the amdump always complain
'not enough disk space' and asks for tape in 'slot 1' where as tape
at 'slot 0' exit s . I am attaching 'amdump' log for refernce .
What am I doing wrong ?
My amanda dump server is radcal2 , and amanda client is radcal . I am
trying to take dump for both m/cs . I am using a DLT tape with 80 GB
capacity ( compressed ).
LOGFILE EXCERPTS
-------------------------------------------------------------
mdump: start at Mon Apr 9 03:22:45 GMT 2001
planner: pid 7634 executable /usr/local/libexec/planner version 2.4.2p2
planner: build: VERSION="Amanda-2.4.2p2"
planner: BUILT_DATE="Sun Apr 8 22:21:58 GMT 2001"
planner: BUILT_MACH="SunOS radcal2.vsnl.net.in 5.6
Generic_105181-21 sun$
planner: CC="gcc"
planner: paths: bindir="/usr/local/bin" sbindir="/usr/local/sbin"
planner: libexecdir="/usr/local/libexec" mandir="/usr/local/man"
planner: AMANDA_TMPDIR="/tmp/amanda" AMANDA_DBGDIR="/tmp/amanda"
planner: CONFIG_DIR="/usr/local/etc/amanda" DEV_PREFIX="/dev/dsk/"
planner: RDEV_PREFIX="/dev/rdsk/" DUMP="/usr/sbin/ufsdump"
planner: RESTORE="/usr/sbin/ufsrestore" GNUTAR="/etc/tar"
planner: COMPRESS_PATH="/usr/local/bin/gzip"
planner: UNCOMPRESS_PATH="/usr/local/bin/gzip"
planner: MAILER="/usr/bin/mailx"
planner: listed_incr_dir="/usr/local/var/amanda/gnutar-lists"
planner: defs: DEFAULT_SERVER="radcal2.vsnl.net.in"
planner: DEFAULT_CONFIG="DailySet1"
planner: DEFAULT_TAPE_SERVER="radcal2.vsnl.net.in"
[ Read 111 lines ]
driver: pid 7632 executable /usr/local/libexec/driver version 2.4.2p2
driver: send-cmd time 0.005 to taper: START-TAPER 20010409
taper: pid 7636 executable taper version 2.4.2p2
changer: opening pipe to: /usr/local/libexec/chg-manual -info
driver: started dumper0 pid 7651
driver: started dumper1 pid 7652
dumper: dgram_bind: socket bound to 0.0.0.0.825
dumper: pid 7652 executable dumper version 2.4.2p2, using port 825
dumper: dgram_bind: socket bound to 0.0.0.0.824
dumper: pid 7651 executable dumper version 2.4.2p2, using port 824
changer: got exit: 0 str: 0 99 1
changer: opening pipe to: /usr/local/libexec/chg-manual -slot current
changer: got exit: 0 str: 0 /dev/rmt/0n
taper: slot 0: date 20010409 label DailySet100 (active tape)
changer: opening pipe to: /usr/local/libexec/chg-manual -slot next
got result for host radcal disk /dev/dsk/c2t4d2s0: 0 -> 64531K, -1 -> -1K,
-1 -$
FAILED QUEUE: empty
DONE QUEUE:
0: radcal /dev/dsk/c2t4d2s0
1: radcal /dev/dsk/c2t4d1s0
2: radcal /dev/dsk/c2t4d0s0
3: radcal2 /dev/dsk/c2t4d0s3
INITIAL SCHEDULE (size 1367631):
radcal /dev/dsk/c2t4d1s0 pri 11421 lev 0 size 1164824
radcal /dev/dsk/c2t4d0s0 pri 11421 lev 0 size 129457
radcal2 /dev/dsk/c2t4d0s3 pri 11421 lev 0 size 40227
radcal /dev/dsk/c2t4d2s0 pri 11421 lev 0 size 32265
DELAYING DUMPS IF NEEDED, total_size 1367631, tape length 1976320 mark 111
delay: Total size now 1367631.
PROMOTING DUMPS IF NEEDED, total_lev0 1366773, balanced_size 68337...
ENERATING SCHEDULE:
--------
radcal /dev/dsk/c2t4d1s0 11421 0 1970:1:1:0:0:0 1164824 38827
radcal /dev/dsk/c2t4d0s0 11421 0 1970:1:1:0:0:0 129457 4315
radcal2 /dev/dsk/c2t4d0s3 11421 0 1970:1:1:0:0:0 40227 1340
radcal /dev/dsk/c2t4d2s0 11421 0 1970:1:1:0:0:0 32265 1075
--------
driver: adding holding disk 0 dir /home2/amanda size 296960
reserving 296960 out of 296960 for degraded-mode dumps
driver: start time 6.071 inparallel 2 bandwidth 2000 diskspace 296960 dir
OBSOL$
