On Mon, 9 Apr 2001 [EMAIL PROTECTED] wrote:
> No, I don't solve the problem, yet. - I slow down the Bus-Speed in the
> Controller-BIOS for the LVD-Connector from 40 to 20MB/sec. - With this
> change, the write-process (backup) now works - but restoring fails...
Oh, I see. For me there was no problem with backup process, but only with
restoring and I solve the problem recompiling amanda with
--with-broken-fsf, following a hint of a guy from this list.
> "cat /proc/scsi/aic7xxx/0"
[root@server /root]# cat /proc/scsi/dpt_i2o/0
Vendor: Adaptec Model: 2100S Rev: 320R, scsi 0:
Adaptec I2O RAID Driver Version: 1.14:
cmd_per_lun = 210, max_id = 15, max_lun = 7, max_channel = 0
sg_tablesize = 39, irq = 17, OutstandingMsgs = 0
maxfromiopmsgs = 64, maxtoiopmsgs = 210
Devices:
Channel = 0, Target = 0, Lun = 0
Channel = 0, Target = 4, Lun = 0
> First, I've to do is, to speed up the tape. Than I try the
> "with-broken-fsf"-option.
Ok, good luck!
Radu
--
Radu Filip
Network Administrator @ Technical University of Iasi
[EMAIL PROTECTED] Information Technology and Communication Center
http://socrate.tuiasi.ro/ [EMAIL PROTECTED] | http://www.ccti.tuiasi.ro/
