On Thu, 3 May 2001, Juergen Knott wrote:
> > >Host: scsi0 Channel: 00 Id: 08 Lun: 00
> > > Vendor: QUANTUM Model: DLT8000 Rev: 0119
> > > Type: Sequential-Access ANSI SCSI revision: 02
> >
> > Here's a thought. Are you sure everything on that bus is wide SCSI?
>
> yes, i'm shure, because the system was running before i installed a new scsi
> hard drive.
Are both the first and second harddisks (at SCSI ID 0 and 1) wide SCSI
??
Narrow devices don't have the 4th address line and thus can't see the
difference between for instance ID 1 (0001) and 9 (1001). So if your
first SCSI disk (sda at SCSI ID=0) is a narrow device, it will (try
to) respond to all commands addressed to device 8.
If the rest of the SCSI bus is the same as in your original email, I would
suggest setting the ID of the tapedrive to 6 and the tape changer to 14
(or vice versa).
--
Tot ziens,
Bart-Jan
