Hi, i seem to have a problem here. I did a dump of one of my system on
the server and, accordingly to the report, the tape was only used at
38%, but amanda asks me to put a new tape... I dont't get it, first the
tape should be the same used, and in second, in worst it should be #2
and not "new tape".
I guess this may be because the tape was never used, so i've put a new
tape that wasnt labeled with amlabel and waited for the day to pass. But
when i got here this morning, the tape was ejected from the server (and
so the dump failed). So my question is: Should i have labelled the tape?
or is it a configuration problem from me?
and why is amanda asking me for a new tape?
here is my report, if you think you need other logs, just tell me:
===========
mail:
===========
These dumps were to tape Trou01.
The next tape Amanda expects to use is: a new tape.
STATISTICS:
Total Full Daily
-------- -------- --------
Estimate Time (hrs:min) 0:04
Run Time (hrs:min) 3:17
Dump Time (hrs:min) 0:39 0:37 0:02
Output Size (meg) 9416.1 9414.2 1.9
Original Size (meg) 9416.1 9414.2 1.9
Avg Compressed Size (%) -- -- -- (level:#disks ...)
Filesystems Dumped 4 1 3 (1:3)
Avg Dump Rate (k/s) 4113.2 4296.5 19.1
Tape Time (hrs:min) 2:33 2:33 0:00
Tape Size (meg) 9416.2 9414.2 2.0
Tape Used (%) 38.3 38.3 0.0 (level:#disks ...)
Filesystems Taped 4 1 3 (1:3)
Avg Tp Write Rate (k/s) 1048.7 1049.2 328.7
NOTES:
planner: Forcing full dump of Kickass:/dev/sd0m as directed.
taper: tape Trou01 kb 9642208 fm 4 [OK]
DUMP SUMMARY:
DUMPER STATS TAPER STATS
HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s
-------------------------- --------------------------------- ------------
Kickass /dev/sd0j 1 640 640 -- 0:26 25.0 0:03 237.3
Kickass /dev/sd0k 1 640 640 -- 0:32 20.0 0:02 405.7
Kickass /dev/sd0l 1 640 640 -- 0:43 14.9 0:02 407.8
Kickass /dev/sd0m 0 96401609640160 -- 37:244296.5 153:081049.2
(brought to you by Amanda version 2.4.2p2)
=============
Thank you for yout time
Xavier Guilbeault
