Mitch Collinsworth ha escrito:
> On Thu, 23 Aug 2001, wanadoo wrote:
>
> > > > I'm trying to configure amanda, but I have a problem every time
> I run
> > > > amdump I receive a report like this:
>
> > I've run amcheck before and everything is ok, but when I run amdump
> it
> > doesn't work.
>
> Ok, good. The next step is to look at the *.debug files in
> /tmp/amanda
> on valinux. There should be some useful information here.
>
> -Mitch
I have looked at the *.debug files but I haven't seen anything strange.
I have looked too at the file amdump.1 and I have found this:
driver: send-cmd time 3.500 to taper: PORT-WRITE 00-00001
volinux.ayto.es
/home/sanzm 0 20010824
driver: result time 3.500 from taper: PORT 1073
driver: send-cmd time 3.500 to dumper0: PORT-DUMP 01-00002 1073
volinux.ayto.es /home/sanzm 0 1970:1:1:0:0:0 GNUTAR
|;bsd-auth;index;exclude-list=/usr/local/lib/amanda/exclude.gtar;
driver: state time 3.500 free kps: 1970 space: 0 taper: writing
idle-dumpers: 3 qlen tapeq: 0 runq: 0
stoppedq: 0 wakeup: 86400 driver-idle: not-idle
driver: interface-state time 3.500 if : free 570 if LE0: free 10000 if
LOCAL: free 10000
driver: hdisk-state time 3.500
driver: result time 3.503 from dumper0: FAILED 01-00002 [taper port
open: Resource temporarily
unavailable]
driver: result time 123.497 from taper: TAPE-ERROR 00-00001 [port
connect timeout]
driver: QUITTING time 123.498 telling children to quit
driver: send-cmd time 123.498 to taper: QUIT
driver: send-cmd time 123.498 to dumper0: QUIT
driver: send-cmd time 123.498 to dumper1: QUIT
driver: send-cmd time 123.498 to dumper2: QUIT
driver: send-cmd time 123.498 to dumper3: QUIT
taper: DONE [idle wait: 0.000 secs]
taper: writing end marker. [Diaria-001 OK kb 0 fm 0]
driver: FINISHED time 128.729
amdump: end at Fri Aug 24 09:54:11 CEST 2001
but I don't known why this fail occurs. Do you known why?
Thanks,
Mercedes.
