On Fri, Nov 23, 2001 at 12:24:00PM +0100, Moritz Both wrote: > hi all, > > this report has been sent to the onstream support. They are currently > investigating it. > > My question to the list members: Does *anybody* acutally use the ADR50 > drive with amanda with success? If this is a firmware bug, more people > should have these problems when using amanda. > > I will post summaries in case of notable results. > > Thanks, > Moritz > > > > > We have a problem with our new OnStream ADR50 tape streamer. > > Brief problem description: > The ADR50 device writes data which it cannot read afterwards > under certain conditions. Those conditions are described below. > > Hardware description: > > AMD Duron 750. Asus A7V133 main board. 256 MB RAM. > Adaptec 29160N SCSI controller. > SCSI LVD bus internal with > 2 devices: > HDD IBM 20 GB (scsi id 0), > tape device OnStream ADR50 internal (scsi id 5) > Firmware rev. 2.39 > S/N EA21J290564 > Other SCSI bus (narrow 50pin internal): > CDROM drive (scsi id 6). > > Software description: > > OS: RedHat Linux 7.1 > kernel: 2.4.2, 2.4.9 (both RedHat patched versions; > the problem appears with both) > Tried Adaptec SCSI driver verison 6.1.7 (w/ kernel 2.4.2), > 6.2.1 and 6.2.4 (w/ kernel 2.4.9); the problem appears > with all of them
Hm you didnt tell if you use the modul for onstream adr support. Maybee this is your problem. Henning Heinold
