On Fri, Dec 07, 2001 at 09:04:48AM -0500, Joshua Baker-LePain wrote: > On Thu, 6 Dec 2001 at 7:38pm, BRINER Cedric wrote > > > One of the problems that I see is : > > Imagine that the dump0 was happenning when we were doing a software > > compression and > > that the dump1 with a hard compression...So when we will recover the > > data, amrecover > > will use the amanda.conf which contain the hard-compression...so the > > system will be able > > to only read one of them...
amrecover (amrestore) read the compression state from the dump image, the setting in the configuration file is not use. Jean-Louis > > You can specify the tape device to use when you start amrecover. Of > course, you'll need to keep track of which tapes were done with hardware > vs. software compression. > > -- > Joshua Baker-LePain > Department of Biomedical Engineering > Duke University -- Jean-Louis Martineau email: [EMAIL PROTECTED] Departement IRO, Universite de Montreal C.P. 6128, Succ. CENTRE-VILLE Tel: (514) 343-6111 ext. 3529 Montreal, Canada, H3C 3J7 Fax: (514) 343-5834