On Tue, 18 Dec 2001, Jean-Louis Martineau wrote: Hi
I will tonight I got the amanda-2.4.3b1-20011214 snapshot Thanks for your quick answer > Hello Eric, > > Could you try the latest snapshot available from > http://www.iro.umontreal.ca/~martinea/amanda > > It should fix this problem. > > Jean-Louis > > On Tue, Dec 18, 2001 at 09:21:43AM +0100, Eric Doutreleau wrote: > > > > Hi > > > > I'm currently evaluating the first beta of the 2.4.3beta1 version and i > > have > > the following problems with the tape changer. > > Im under solaris and i use the stc driver with the associate changer > > script. > > It works quite well on the 2.4.2p2 version but with the 2.4.3b1 version i > > got > > the following error on the amdump file > > > > > > driver: hdisk-state time 22984.326 hdisk 0: free 5480521 dumpers 3 > > taper: writing end marker. [MCI16 ERR kb 35984768 fm 271] > > changer: opening pipe to: /usr/local/libexec/stc-changer -info > > changer: got exit: 0 str: 4 10 1 > > changer_query: changer return was 10 1 > > changer_query: searchable = 0 > > changer_find: looking for MCI17 changer is searchable = 0 > > changer: opening pipe to: /usr/local/libexec/stc-changer -slot current > > changer: got exit: 0 str: 4 /dev/rmt/0n > > taper: slot 4: date 20011214 label MCI16 (active tape) > > changer: opening pipe to: /usr/local/libexec/stc-changer -slot next > > changer: got exit: 0 str: 5 /dev/rmt/0n > > taper: slot 5: date X label MCI17 (exact label match) > > taper: read label `MCI17' date `X' > > taper: wrote label `MCI17' date `20011214' > > driver: result time 23208.351 from taper: QUITTING 00-00549 [writing file: > > short > > write] > > driver: driver received unexpected token (2) from taper > > taper: DONE [idle wait: 7082.735 secs] > > taper: writing end marker. [MCI17 OK kb 0 fm 0] > > amdump: end at Sat Dec 15 03:25:50 MET 2001 > > dumper: error [bad command after RQ-MORE-DISK: 1] > > error [bad command after RQ-MORE-DISK: 1] > > dumper: pid 1093 finish time Sat Dec 15 03:37:24 2001 > > > > Has someone already seen this problem between driver and taper? > > The output of taper seems ok but not for driver > > > > Neverthless i will go investigate in the source code > > > > Thanks in advance for any help > > > > > > > > -- > > Eric Doutreleau > > I.N.T | Tel : +33 (0) 160764687 > > 9 rue Charles Fourier | Fax : +33 (0) 160764321 > > 91011 Evry France | email : [EMAIL PROTECTED] > > -- Eric Doutreleau I.N.T | Tel : +33 (0) 160764687 9 rue Charles Fourier | Fax : +33 (0) 160764321 91011 Evry France | email : [EMAIL PROTECTED]
