I'm running amanda 2.4.2p2 on 3 BSDI 4.1 boxes. The first two are setup and
running fine. I'm configuring the third box and I get the following error
running amcheck:
relay# su amanda -c "/usr/local/sbin/amcheck tig"
"/usr/local/etc/amanda/tig/amanda.conf", line 26: configuration
keyword expected
"/usr/local/etc/amanda/tig/amanda.conf", line 26: end of line
expected
"/usr/local/etc/amanda/tig/amanda.conf", line 151: configuration
keyword expected
"/usr/local/etc/amanda/tig/amanda.conf", line 151: end of line
expected
amcheck: could not find config file
"/usr/local/etc/amanda/tig/amanda.conf"
amanda.conf is in : /usr/local/etc/amanda/tig
relay# pwd
/usr/local/etc/amanda/tig
relay# ls -al
total 26
drwxr-xr-x 2 amanda operator 512 Feb 27 13:53 .
drwxr-xr-x 4 amanda operator 512 Feb 11 09:10 ..
-rw-r--r-- 1 amanda operator 21272 Feb 11 10:44 amanda.conf
here are amanda.conf lines 25-27:
:25 # modifying MAX_DUMPERS in
server-src/driverio.h
:26 dumporder "sssS" # specify the priority order of each dumper
:27 # s -> smallest size
here are amanda.conf lines 150-152:
150: autoflush no #
151: # if autoflush is set to yes, then amdump will schedule all dump on
152: # holding disks to be flush to tape during the run.
The identical amanda.conf file runs fine on the other two Amanda/BSDI boxes.
Any ideas as to what I've fouled up here?
Thanks,
Brian Davidson
11710 Plaza America Drive
Reston, Virginia 20190
703.261.4694
703.261.5086 Fax
