-----BEGIN PGP SIGNED MESSAGE-----

>>>>> "Ulrik" == Ulrik Sandberg <[EMAIL PROTECTED]> writes:
    Ulrik> On Sun, 5 May 2002, Niall O Broin wrote:

    >> On Sat, May 04, 2002 at 08:02:58PM -0400, Michael Richardson wrote:
    >> 
    >> > The three behind the firewall fail frequently, but not 100% of the
    >> time.  > I setup backups for just those hosts, and watch with
    >> tcpdump. I've built with > the appropriate port ranges, but I never
    >> seen firewall failures, yet I get > failures.
    >> 
    >> Speak to me brother ! I've been posting about a similar problem here
    >> but I've got no responses. Do you get messages like these in the
    >> report:
    >> 
    >> serv1 /boot lev 0 FAILED [Request to serv1 timed out.]  serv1 / lev 0
    >> FAILED [Request to serv1 timed out.]

    Ulrik> I had similar failures (using tar) and the reason was slow
    Ulrik> estimates. I changed to dump and it worked. Then I split the file
    Ulrik> system into smaller parts and went back to tar. It continued to
    Ulrik> work.

  I use dump everywhere that I can, and often plan my file system sizes so
that I can always get a level 0 on a single tape.

    Ulrik> I also increased the timeouts for estimates in amanda.conf
    Ulrik> (etimeout) to 1200 seconds per file system.

  That's the kind of thing I was looking for...
  Still 5 minutes per-file system ought to have bene enough.

    Ulrik> Another thing to check is the network bandwidth limit (netusage),
    Ulrik> which I believe can cause trouble if it is incorrectly set. Mine
    Ulrik> is set to 8000.

  Hmm. My backup server actually has a 10Mb/s NIC card on a 100Mb/s hub. I
can easily change this, but I'm skeptical about this.  Mine is set to 600KB.

]       ON HUMILITY: to err is human. To moo, bovine.           |  firewalls  [
]   Michael Richardson, Sandelman Software Works, Ottawa, ON    |net architect[
] [EMAIL PROTECTED] http://www.sandelman.ottawa.on.ca/ |device driver[
] panic("Just another NetBSD/notebook using, kernel hacking, security guy");  [




-----BEGIN PGP SIGNATURE-----
Version: 2.6.3ia
Charset: latin1
Comment: Finger me for keys

iQCVAwUBPNWKdoqHRg3pndX9AQF/zgQAxQ85NrWJUOkwvge7bd2p/aEr99DYMOTn
dT36e4hGE4qZ4gZ1NUoyK7ZryVeB9qf4HlPba5ZPG1EkvJ1tHeoRERNopJPZhTs3
nbZXlz6Jfe16Lj01KtToj1ljh5KJUuRar4424Hhe00T8IJQW92+I46A7gFpBsQ5u
breITkMW+Es=
=cxkh
-----END PGP SIGNATURE-----

Reply via email to