Ok, I figured out the permissions problem that was preventing amcheck from
working, as per below.
amcheck now finishes with no errors.

When I run amdump, "top" on the client shows gtar working away, so it data
compression seems to be happening. amdump finishes with no errors, but in
the report email, I get:

> These dumps were to tape daily001.
> The next tape Amanda expects to use is: daily001.
>
> FAILURE AND STRANGE DUMP SUMMARY:
>   client.agic. /usr lev 0 FAILED [Request to client.agic.ne.jp timed out.]
>
>
> STATISTICS:
>                           Total       Full      Daily
>                         --------   --------   --------
> Estimate Time (hrs:min)    0:15
> Run Time (hrs:min)         0:15
> Dump Time (hrs:min)        0:00       0:00       0:00
> Output Size (meg)           0.0        0.0        0.0
> Original Size (meg)         0.0        0.0        0.0
> Avg Compressed Size (%)     --         --         --
> Filesystems Dumped            0          0          0
> Avg Dump Rate (k/s)         --         --         --
>
> Tape Time (hrs:min)        0:00       0:00       0:00
> Tape Size (meg)             0.0        0.0        0.0
> Tape Used (%)               0.0        0.0        0.0
> Filesystems Taped             0          0          0
> Avg Tp Write Rate (k/s)     --         --         --
>
>
> NOTES:
>   planner: Adding new disk client.agic.ne.jp:/usr.
>   driver: WARNING: got empty schedule from planner
>   taper: tape daily001 kb 0 fm 0 [OK]
>
>
> DUMP SUMMARY:
>                                      DUMPER STATS            TAPER STATS
> HOSTNAME     DISK        L ORIG-KB OUT-KB COMP% MMM:SS  KB/s MMM:SS  KB/s
> -------------------------- --------------------------------- ------------
> client.agic.ne /usr        0
FAILED ---------------------------------------
>
> (brought to you by Amanda version 2.4.2p2)

Can anyone help me end this nightmare?

Shawn



----- Original Message -----
From: "Jonathan Murray" <[EMAIL PROTECTED]>
To: "GIC MLs" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Saturday, May 11, 2002 1:55 AM
Subject: Re: selfcheck request timed out.


> check .amandahosts file.
> also make sure that you don't use FQDN in .amandahosts.
>
> GIC MLs wrote:
>
> > Hi,
> >
> > I'm running Amanda 2.4.2p2, and when I run "amcheck daily", I get:
> >
> > Amanda Tape Server Host Check
> > -----------------------------
> > NOTE: skipping tape-writable test
> > Tape daily001 label ok
> > NOTE: info dir /usr/local/etc/amanda/daily/curinfo: does not exist
> > NOTE: it will be created on the next run
> > Server check took 5.219 seconds
> >
> > Amanda Backup Client Hosts Check
> > --------------------------------
> > WARNING: client.agic.ne.jp: selfcheck request timed out.  Host down?
> > Client check: 1 host checked in 30.078 seconds, 1 problem found
> >
> > The client machine is pingable and configured with amandad running off
of
> > inetd.
> > Can anyone tell me where I should start looking for the root of this
> > problem?
> >
> > Thank you for any assistance.
> >
> > Shawn
> >
> >
>
>
>
>
>

Reply via email to