i need a little help with my new tape drive i used to have an internal travan tape drive, scsi, which showed up as /dev/st0, i recently aquired an external dds3 drive, sony sdt-9000, so i took my internal drive out of the system and plugged the dds drive into it
kudzu picked up this change and made corrections to my system configuration, however this new drive does not show up as /dev/st0 nor does it show up as /dev/tape or any other of the dozens of different devices i tried, i had to make this because i was severely limited by how much i can backup on to the trusty old travan when linux boot's there is no problem finding the drive, it show up between my hard drives the first hard drive is id 0, /dev/sda 2nd hard drive is id 2, /dev/sdb 3rd hard drive is id 4, /dev/sdc sony sdt tape drive is id 6, no device is given here 4th hard drive is id 10, /dev/sdd i am running redhat 7.0 with kernel 2.2.16 any help or pointer as to where i can find a solution to my problem would be greatly appreciated thx
