Test #1: I commented out all filesystems except one of the failing ones and simply ran amdump. RESULT: Worked perfectly.
Test #2: Added in the final two failing filesystems and ran amdump. RESULT: Worked perfectly. Any suggestions on what it could be. I have the following set in amanda.conf: inparallel 16 netusage 75000 Kbps tapebufs 40 reserve 25 for my holdingdisk I have set the chunksize to 1Gb Which side is most likely to cause a Data Timeout client or server? Are there any suggestions on where to do the compression? Jon, thank you for your response regarding the ufsdumps. I had reverted back to that during that particular run to see if I could ease some contention somewhere. But to no avail. Thanks again, Jim On Wed, 2002-08-14 at 14:37, Joshua Baker-LePain wrote: > On 14 Aug 2002 at 2:19pm, Jim Summers wrote > > > In an effort to debug this problem, is there a way I can interactively > > run the command(s) that amanda would run to see if anything is dumped to > > stdout? If so, are these the commands in runtar and sendbackup? Or > > would it be better to comment out all filesystems except one of the ones > > having problems and run amdump? > > The exact commands are in both runtar*debug and sendbackup*debug. It > would be interesting to comment out some filesystems to see if it's a > function of having too much going on on one host, or if it's something > particular to those filesystems. > > -- > Joshua Baker-LePain > Department of Biomedical Engineering > Duke University >
