Hi all,
I'm getting this in my kern.log's:
---
Sep 6 00:45:01 valhalla kernel: st: Version 20020205, bufsize 32768, wrt 30720, max
init. bufs 4, s/g segs 16
Sep 6 00:45:01 valhalla kernel: Attached scsi tape st0 at scsi0, channel 0, id 0, lun 0
Sep 6 00:45:01 valhalla kernel: st0: Block limits 25976 - 6841632 bytes.
Sep 6 01:18:39 valhalla kernel: st0: Error with sense data: Info fld=0x10200,
Deferred st09:00: sense key Medium Error
Sep 6 01:18:39 valhalla kernel: Additional sense indicates Sequential positioning
error
Sep 6 01:30:01 valhalla kernel: st: Unloaded.
---
This was from an amdump, which failed after 64kb written.
A little bit later, running an amcheck:
---
Sep 6 09:54:45 valhalla kernel: st: Version 20020205, bufsize 32768, wrt 30720, max
init. bufs 4, s/g segs 16
Sep 6 09:54:45 valhalla kernel: Attached scsi tape st0 at scsi0, channel 0, id 0, lun 0
Sep 6 09:54:45 valhalla kernel: st0: Block limits 11268 - 112641 bytes.
Sep 6 10:09:45 valhalla kernel: scsi : aborting command due to timeout : pid 72600,
scsi0, channel 0, id 0, lun 0 Read (6) 01 00 00 40 00
Sep 6 10:09:45 valhalla kernel: hdd: irq timeout: status=0xc0 { Busy }
Sep 6 10:09:45 valhalla kernel: hdd: ATAPI reset complete
Sep 6 10:09:45 valhalla kernel: hdd: irq timeout: status=0x80 { Busy }
Sep 6 10:09:46 valhalla kernel: hdd: ATAPI reset complete
Sep 6 10:09:46 valhalla kernel: hdd: irq timeout: status=0x80 { Busy }
Sep 6 10:09:46 valhalla kernel: st0: Error 27070000 (sugg. bt 0x20, driver bt 0x7,
host bt 0x7).
Sep 6 10:20:01 valhalla kernel: st: Unloaded.
---
Pulled the tape out, plugged it back in, and now its dumping fine. Can anyone make
sense of this?
BTW is there a way of getting amanda to put level 0's in "degraded mode"? I'd still
like full dumps when I have to manually run amdump.
Regards,
Brian Jonnes
--
Init Systems - Linux consulting
031 767-0139 082 769-2320 [EMAIL PROTECTED]
