On Monday 09 September 2002 13:42, Quinn, Richard C. - Collinsville IT wrote: >Hi, > >I'll rephrase the original question because it might've been a > little bit vague. > >I am running amanda 2.4.3b2. > >I am running this on a Sparc E450 running solaris 6. > >My jukebox/tape changer is a StoragTEK 9730. > >It has 2 Quantum DLT drives and 30 slots. > >I've been trying to make chg-scsi work with BOTH tape drives. >That didn't work, so I thought maybe I could get by with making > chg-scsi work with 2 different config files. >One config file for each drive. >That didn't work either. >So I thought I'd just concentrate on trying to make chg-scsi work > on one drive at a time. > >I can make my chg-scsi command work just fine when using the first >Quantum DLT drive (/dev/rmt/2). > >So I then tried to make chg-scsi work with only the OTHER drive >(/dev/rmt/3). > >That didn't work. > >So it seems that my problem is that I cannot make chg-scsi work > with the second tape drive(/dev/rmt/3). > > >Here is a snippet from amanda.conf: >(NOTE, I have switched tapedev from '0' to /dev/rmt/3n(the > commented entry)). > >=================================================== >tpchanger "chg-scsi" # >changerfile "/usr/local/amanda/etc/amanda/DailySet1/chg-scsi.conf" >changerdev "/dev/rsst0" >tapedev "0" # the no-rewind tape device to be used >#tapedev "/dev/rmt/3n" # the no-rewind tape device to be used >=================================================== > > >And here is chg-scsi.conf: >=================================================== This s/b 2 >number_configs 1 >eject 1 >sleep 60 >cleanmax 10 >changerdev /dev/rsst0 ># >Drive 0 ># below starts the first config >config 0 >drivenum 0 >dev /dev/rmt/3n >startuse 0 >enduse 29 >statfile /var/adm/amanda/DailySet1/tape1-slot >cleancart 25 >cleanfile /var/adm/amanda/DailySet1/tape1-clean >usagecount /var/adm/amanda/DailySet1/totaltime-tape1 >tapestatus /var/adm/amanda/DailySet1/tape1-status > > Then add your second config below here config 1 etc,etc
And I'm pretty sure that 'tapedev' above actually refers the the config number in the chg-scsi.conf file. -- Cheers, Gene AMD K6-III@500mhz 320M Athlon1600XP@1400mhz 512M 99.14% setiathome rank, not too shabby for a WV hillbilly
