Also Sprach Paul Jakma: > > ooh wow. RAIT can do RAID1 aswell as RAID3 (or is it 4?)? yippee! >
Yes, it can. Do a search on Marc Mengel's posts on the Amanda list from about a month ago. Just list two tape drives using the rait: driver. If you list a third it will do RAIT 4, if the third tape device is null: it will toss away parity and do a RAIT 0 across two drives (with the overhead of the parity calculation however). > > unfortunately we dont.. so RAIT wont work. the mirror and the local > tape backup have to be decoupled. :( > How does your bandwidth compare with just doing RAIT 1 on site and shipping the tapes offsite? If you want Amanda to write to a tape drive off site over a low-bandwidth link then it will be very slow and you won't really be mirroring. That remote tape drive won't do much for you unless you can stream to it; LTO or SuperDLT may stream at 20MBps but if your link is only 128kbps be prepared to watch that tape drive backhitch and shoeshine like an American blue collar laborer under the Bush Jr. economy. > (either that or we have to find a rainbow with a pot of gold so we can > buy fibre across the irish sea! :) ) > The FedEx leprechauns might be satisfied with less. > regards, > -- > Paul Jakma Sys Admin Alphyra > [EMAIL PROTECTED] > Warning: /never/ send email to [EMAIL PROTECTED] or [EMAIL PROTECTED] > ---- C. Chan <[EMAIL PROTECTED]> GPG Public Key ( pgp.mit.edu | finger [EMAIL PROTECTED] ) "Lif is laene: eal sceaceth, leoht ond lif samod"
