(oops- I realized this didn't go back to the list) On Tue, 2003-01-14 at 16:47, Michael J. Pawlowsky wrote: > There are other factors. What else is the machine doing? Does the bus > support that speed etc.
The machine is solely dedicated to Amanda. It is doing nothing else. This drive is in an HP StorageWorks MSL5026S2 library, connected to an LVD SCSI bus (80MB/s), so there should be no bottleneck there. The host's disks are on a separate LVD channel. The buses are terminated properly-- dmesg shows no SCSI errors. After disabling H/W compression, I am getting the same performance from tapetype. It has been running for 15 hours and has only written about 30GB. What are the consequences of having the wrong values in a tapetype definition? If the size value is too large, Amanda will just encounter EOT sooner than expected, right? If it's too low, you waste some tape. I'm thinking I might take what people have already posted for the DLT220 drive and scale it up by 45% (160 is 45% more than 110). Am I crazy? ;) Eric
