Ray,
Following advice (I can dig through my email, I can't take
credit) from amanda_users...
modify /kernel/drv/sgen.conf, add lines "like" the following
Note, my changers are on busses 5 and 6 both at SCSI id 4.
device-type-config-list="changer";
name="sgen" class="scsi" target=4 lun=0;
# devfsadm -i sgen loads the driver
my changers became availalbe at /dev/scsi/changer/c5t4d0 and
/dev/scsi/changer/c6t4d0
Note that amanda.conf will use both changerdev and tapedev
information...
ah, credit - Darin Perusich <[EMAIL PROTECTED]>
thank you Darin, my system is working beautifully.
Brian
---
Brian R Cuttler [EMAIL PROTECTED]
Computer Systems Support (v) 518 486-1697
Wadsworth Center (f) 518 473-6384
NYS Department of Health Help Desk 518 473-0773
> Sun solaris 8
> 5.8 Generic_108528-17 sun4u sparc
>
> Ray Keckler
>
> -----Original Message-----
> From: Brian Cuttler [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, February 05, 2003 3:13 PM
> To: Raymond Keckler
> Cc: [EMAIL PROTECTED]
> Subject: Re: Sun L1000 and Amanda
>
>
> What operating system ? What version of the OS ?
>
> > Does anybody know how to setup the Sun L1000 tape library system? I
> have
> > found some links on the web but I can not use the robot arm to load
> > tapes.
> >
> > I know the no rewind device is /dev/rmt/0bn but what is the device for
> > the loader?
> >
> >
> >
> > Ray Keckler
> >
> > [EMAIL PROTECTED]
> >
>
>
