I need to backup the first drive to the second hard drive on the same machine (client + server), but encounter this when running amdump. Here're the config. and the error mail
Thank you
====================================================================== # # amanda.conf org "testSet" # organization name for reports mailto "[EMAIL PROTECTED]" # operators at your site dumpuser "amanda" # the user to run dumps under
inparallel 3 # maximum dumpers that will run in parallel
netusage 600 kbps # maximum net bandwidth for Amanda, in KB per sec
# our local network can provide up to 100MB/sdumpcycle 1 day # the number of day in the normal dump cycle runspercycle 1 day # the number of amdump runs in dumpcycle days
tapecycle 2 runtapes 1
bumpsize 20 Mb # minimum savings (threshold) to bump level 1 -> 2 bumpdays 1 # minimum days at each level bumpmult 4 # threshold = bumpsize * bumpmult^(level-1)
ctimeout 300 etimeout 300 # number of seconds per filesystem for estimates.
reserve 10
tapetype HARD-DISK
labelstr "^testSet[0-9][0-9]*$" # label constraint regex:
# all tapes must match
tpchanger "chg-multi"
changerfile "/usr/etc/amanda/testSet/changer.conf"
tapedev "file:/home/general/backup"define tapetype HARD-DISK {
comment "Dump onto hard disk"
length 10 gbytes # these numbers are not accurate
}
infofile "/usr/etc/amanda/amandalog/testSet/curinfo" # database logdir "/usr/etc/amanda/amandalog/testSet" # log indexdir "/usr/etc/amanda/amandalog/testSet/index" # index
define dumptype global {
comment "Global definitions"
index yes
record yes
}define dumptype hard-disk-dump {
global
comment "Back up to hard disk - dump"
holdingdisk no
priority high
}define dumptype hard-disk-tar {
hard-disk-dump
comment "Back up to hard disk - tar"
program "GNUTAR"
}define dumptype hard-disk-tar-full {
hard-disk-dump
compress none
dumpcycle 0
}# network interfaces #
define interface local {
comment "a local disk"
use 1000 kbps
}define interface eth0 {
comment "10 Mbps ethernet"
use 400 kbps
}# # changer.conf multieject 0 gravity 0 needeject 0 ejectdelay 0
statefile /usr/etc/amanda/testSet/changer.stat
firstslot 1 lastslot 1
slot 1 file:/home/general/backup/t1
# # disklist # # File format is: # # hostname diskdev dumptype # # where the dumptypes are defined by you in amanda.conf.
## note: -1 is a placeholder for the spindle number ## the holding disk can't be dumped to itself, it uses a disktype that ## specifies the "no-hold" option (see amanda.conf).
linux /Mail hard-disk-tar-full -1 local
# # .amandahosts localhost amanda linux amanda
# # email error ---------- Forwarded message ---------- Date: Mon, 24 Feb 2003 10:32:00 -0800 From: Amanda <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: testSet AMANDA MAIL REPORT FOR February 24, 2003
*** A TAPE ERROR OCCURRED: [new tape not found in rack]. Some dumps may have been left in the holding disk. Run amflush to flush them to tape. The next tape Amanda expects to use is: a new tape.
FAILURE AND STRANGE DUMP SUMMARY: lnx200 /Mail lev 0 FAILED [can't switch to incremental dump]
STATISTICS: Total Full Daily -------- -------- -------- Estimate Time (hrs:min) 0:00 Run Time (hrs:min) 0:00 Dump Time (hrs:min) 0:00 0:00 0:00 Output Size (meg) 0.0 0.0 0.0 Original Size (meg) 0.0 0.0 0.0 Avg Compressed Size (%) -- -- -- Filesystems Dumped 0 0 0 Avg Dump Rate (k/s) -- -- --
Tape Time (hrs:min) 0:00 0:00 0:00 Tape Size (meg) 0.0 0.0 0.0 Tape Used (%) 0.0 0.0 0.0 Filesystems Taped 0 0 0 Avg Tp Write Rate (k/s) -- -- --
NOTES: planner: Adding new disk lnx200:/Mail.
DUMP SUMMARY:
DUMPER STATS TAPER STATS
HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s
-------------------------- --------------------------------- ------------
lnx200 /Mail 0 FAILED ---------------------------------------(brought to you by Amanda version 2.4.2p1)
