I have a C5713A and this its my configuration,... For cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 05 Lun: 00 Vendor: HP Model: C5713A Rev: H107 Type: Sequential-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 05 Lun: 01 Vendor: HP Model: C5713A Rev: H107 Type: Medium Changer ANSI SCSI revision: 02
For chg-scsi.conf i have this cat /etc/amanda/Diario/chg-scsi.conf number_configs 1 eject 1 # Tapedrives need an eject command #eject 0 # Tapedrives need an eject command sleep 90 # Seconds to wait until the tape gets ready cleanmax 100 # How many times could a cleaning tape get used changerdev /dev/sg1 # # Next comes the data for drive 0 # config 0 drivenum 0 dev /dev/nst0 scsitapedev /dev/sg0 startuse 0 # The slots associated with the drive 0 enduse 4 # statfile /etc/amanda/Diario/tape0-slot # The file where the actual slot is stored cleancart 5 # the slot where the cleaningcartridge for drive 0 is located cleanfile /etc/amanda/Diario/tape0-clean # The file where the cleanings are recorded usagecount /etc/amanda/Diario/totaltime tapestatus /etc/amanda/Diario/tapestatus # here will some status infos be stored #labelfile /etc/amanda/Diario/labelfile # Use this if you have an barcode reader If anyone see a error please let me know,.. but work well. Regards!! On Thu, 20 Mar 2003, Mats Blomstrand wrote: {Hi all. {I have a HP C7200 (Dell powervault 128T) medium changer that i cant figure {out how to talk to. I have read the chg-scsi instructions but i havent managed {to understand what to do other than the "big-picture". That doesnt help when {it comes to details (the devil is in the details, someone wise said :) ). { {What device should i specify? { {Here is the systems view of the devices. { bash$ cat /proc/scsi/scsi { Attached devices: { Host: scsi0 Channel: 00 Id: 00 Lun: 00 { Vendor: HP Model: C7200 Rev: 140D { Type: Medium Changer ANSI SCSI revision: 03 { Host: scsi0 Channel: 00 Id: 01 Lun: 00 { Vendor: HP Model: Ultrium 1-SCSI Rev: E24V { Type: Sequential-Access ANSI SCSI revision: 03 { {Or rather i should ask: How should i create the device? { {Background-info: First time amanda user, Intel PC, RH7.2 {//Mats {