This is the changer with one SCSI ID for the drive and one SCSI ID for the robot. It essentially has 10 slots, if barcode reader is installed then it drops to 9 slots (slot number 10 is used for reading the barcode). For the LTO version it has the same specs as the DLT drive. There is also an SDLT version.
mtx should work with the autoloader, although I haven't personally tested this yet. Tien Ton -----Original Message----- From: Jay Lessert [mailto:[EMAIL PROTECTED] Sent: 10. juni 2003 19:02 To: Tom Brown Cc: [EMAIL PROTECTED] Subject: Re: NEC autoloaders On Tue, Jun 10, 2003 at 04:38:09PM +0100, Tom Brown wrote: > > Has anyone had any experience using LTO autoloaders from NEC and amanda? > > > > Specifically this one > > > > http://www.nec-cebit.com/products/LL0101H.asp > > if nobisy has had any joy with these autoloaders can anyone recommend a LTO > autoloader to work with amanda that has about 8 tapes? Chances are nobody had ever heard of it before, I hadn't. As far as changers go, if it works with mtx, it will work with Amanda (through chg-zd-mtx). Check out the compatibility list at http://mtx.badtux.org/. -- Jay Lessert [EMAIL PROTECTED] Accelerant Networks Inc. (voice)1.503.439.3461 Beaverton OR, USA (fax)1.503.466.9472
