On Thu, 12 Jun 2003 at 2:23pm, Tom Brown wrote > Attached scsi tape st0 at scsi0, channel 0, id 4, lun 0 > Attached scsi tape st1 at scsi0, channel 0, id 4, lun 1 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 > Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Each of those devices *also* has a generic device, in order. /dev/sg0-/dev/sg3. > This is a single drive unit so one ID is for the robot and the other is for > the tape device. > > amcheck-server: could not get changer info: badly formed result from > changer: "cannot open SCSI device '/dev/sg4' - No such device or address" There *is* no sg4. What in your config files points at sg4? -- Joshua Baker-LePain Department of Biomedical Engineering Duke University
