Hi Joshua, amlabel gave an [input/output error] tapelist not found. Sorry cannot give you the exact message because at this time the tape drive is disconnected from the linux box. However, I have the log for when I last ran amdump and it asks for the tapelist too. Here it is:
********************************************************************* FATAL planner could not load tapelist "/etc/Amanda/test/tapelist" START driver date 20030612 WARNING driver WARNING: got empty schedule from planner STATS driver startup time 0.004 FATAL taper could not load tapelist "/etc/Amanda/test/tapelist" FATAL driver reading result from taper: Connection reset by peer ********************************************************************** But from what you said, I gather that the tapelist is not created alongside the amanda.conf and disklist when AMANDA is installed... anyway as soon as I get the tape drive back in the next few hours I get the exact error message. Thanks a lot. Harry. -----Original Message----- From: Joshua Baker-LePain [mailto:[EMAIL PROTECTED] Sent: Friday, June 13, 2003 11:28 AM To: Harry Mbang Cc: [EMAIL PROTECTED] Subject: Re: Need A sample Tapelist file On Fri, 13 Jun 2003 at 11:25am, Harry Mbang wrote > Could someone please send me an example of a tapelist file or point > me to where I can find such. I have installed Amanda several times on a > Pentium 4 (HP VL 420) running Suse 8.1 Professional, but each time the > tapelist (what I understand to be one of the three main configuration > files along with amanda.conf and disklist) is not created. I am using a > PowerTape (PT-25) with the following specs: tapelist is created when you run amlabel. What exactly is amlabel complaining about? -- Joshua Baker-LePain Department of Biomedical Engineering Duke University
