Hi, Chris Weisiger, on Samstag, 27. September 2003 at 16:21 you wrote to amanda-users:
CW> Yes i have created the chg-scsi.conf file CW> Thats the first thing i do >>> [EMAIL PROTECTED] DailySet1]# /usr/lib/amanda/chg-scsi -info >>> please check your config and use a config file for >>> chg-scsi >>> [EMAIL PROTECTED] DailySet1]# >>> >>> here is the part of amanda.conf dealing with the >>>location >>> of the config file for chg-scsi >>> >>> runtapes 1 # number of tapes to be used in >>>a >>> single run of amdump >>> tpchanger "/usr/lib/amanda/chg-scsi" # the >>>tape-changer >>> glue script >>> #tapedev "/dev/null" # the no-rewind tape device to >>>be >>> used >>> #rawtapedev "/dev/null" # the raw device to be used >>>(ftape >>> only) >>> changerfile "/etc/amanda/DailySet1/chg-scsi.conf" >>> #changerdev "/dev/null" >>> >>> is this correct? I just checked with the example amanda.conf and my chg-multi-setup: Use tpchanger "chg-scsi" instead of tpchanger "/usr/lib/amanda/chg-scsi" your changerfile-line seems ok, I hope you used the template and edited it properly. It will show as soon as it is read by chg-scsi ;-) >>> i have even created symlinks to the amanda.conf file and >>> chg-scsi.conf in /usr/lib/amanda Please remove those links. No need for them there, they just add confusion ... All your amanda-configs go to your configdir, in your case "/etc/amanda/DailySet1". -- best regards, Stefan Stefan G. Weichinger mailto:[EMAIL PROTECTED]
