Hi. Thanks for all your replies. I'm not through my tapecycle yet so that is probably the reason.
Regards Mads On Mon, 2003-10-20 at 21:34, Frank Smith wrote: > --On Monday, October 20, 2003 20:39:45 +0200 Mads Pultz <[EMAIL PROTECTED]> wrote: > > > Hi. > > > > I have the following settings. > > > > dumpcycle 3 days > > runspercycle 3 days > > tapecycle 8 tapes > > > > runtapes 1 > > tapedev "/dev/nst0" > > > >> From the backup report that is sent to me every day everything seems to > > be fine. However, there is one thing that bugs me. The report begins > > like this > > > > These dumps were to tape Daily006. > > The next tape Amanda expects to use is: a new tape. > > > > However, I would like AMANDA to only accept the immediate subsequent > > tape (in this case tape Daily007). In this at all possible? If so what > > am I doing wrong. I messed around with the chg-manual script for a while > > but without any luck. > > I'm guessing that all your tapes aren't in your tapelist, so all > Amanda knows is that its not yet time to reuse any of the ones it knows > about, so its asking for a new tape. > Once your tapelist is as long or longer than your tapecyle Amanda > will ask for the oldest one in the tapelist (oldest meaning the tape > last written to the longest time ago). > > Frank > > > > > Any help would be appreciated. > > > > Mads -- Mads Pultz Systems Architect Nordija A/S Gladsaxevej 382 DK - 2860 S�borg Denmark Email: [EMAIL PROTECTED] Phone Office: +45 70 20 25 10 Phone Mobile: +45 30 94 58 63
