On Wednesday 26 November 2003 17:42, Curtis Vaughan wrote: >I have tried sending this to the Amanda Users list several times, > but it will never go through. Although just a test message goes > through. Here we go again. > >So, here is the result of an amcheck. What is the possible problem >with the system? Why is expecting a new tape? Is there a way to > reset the device and make it think there is a new tape in? Thanks! > >Amanda Tape Server Host Check >----------------------------- >Holding disk /var/tmp: 728376 KB disk space available, that's plenty >ERROR: /dev/nst0: reading label: Input/output error > (expecting a new tape)
Either /dev/nst0 is something you don't have perms for, and that error message doesn't indicate that to me, or the tape has never been labeled by amlabel. It could also come from a block size miss-match IF you are not useing the default 512 byte blocks of most tape formats. But I doubt that and tend to look at the labeling of the tape, or lack thereof. >NOTE: skipping tape-writable test >NOTE: info dir /var/lib/amanda/DailySet1/curinfo: does not exist >NOTE: it will be created on the next run >NOTE: index dir /var/lib/amanda/DailySet1/index/localhost: does not >exist Oh boy, here we go again. Do NOT use localhost in your disklist entries, use a FQDN (Fully Qualified Domain Name) that can at least be looked up in your /etc/hosts file. >Server check took 16.436 seconds > >(brought to you by Amanda 2.4.2p2) > > >Curtis Vaughan -- Cheers, Gene AMD [EMAIL PROTECTED] 320M [EMAIL PROTECTED] 512M 99.27% setiathome rank, not too shabby for a WV hillbilly Yahoo.com attornies please note, additions to this message by Gene Heskett are: Copyright 2003 by Maurice Eugene Heskett, all rights reserved.
