On Friday 05 December 2003 12:05, Blake Swensen wrote: >System: solaris 6 >changer: exb-210 > >Have exb-210 with two drives. Have never been able to get the >stc-changer script to use the second drive (/dev/rmt/1n). > >Hasn't been a problem until now, but /dev/rmt/0n failed and want to > use the second drive to cover while repairs are made. > >Have changed the stc-changer script lines to: >DRIVE_NAME="/dev/rmt/1n" >DRIVE_NUM=1 > >However amtape still loads tapes into drive 0. I can get stc to > move tapes around to the second drive and back into the slots, but > amtape simply defaults to drive 0 regardless of the configuration > of stc-changer. > >I have verified the location of tpchanger "stc-changer" (and have >pointed it directly to the script (ie tpchanger >"/usr/local/libexec/amanda/stc-changer"), but that doesn't work > either. > >Should I then try to reconfigure/reinstall amanda using the >--with-tape-device=/dev/rmt/1bn flag... > >Blake
I'd suspect thats goiung to be the easiest way out in the long run, and it gives you a good excuse to install the latest snapshot while you are at it. -- Cheers, Gene AMD [EMAIL PROTECTED] 320M [EMAIL PROTECTED] 512M 99.27% setiathome rank, not too shabby for a WV hillbilly Yahoo.com attornies please note, additions to this message by Gene Heskett are: Copyright 2003 by Maurice Eugene Heskett, all rights reserved.
