Hello Amanda Users, I'm running IRIX 6.5.19 amanda 2.4.2p2 MTX 1.3.8
MTX itself seems to work correctly (see output below). However I'm unable to get proper replies either from the glue script nor from amanda (which one would expect with a problem with the level underneath). Perhaps I've selected the wrong glue script for this robot ? samar 42% mtx -f /dev/scsi/sc1d4l0 inquiry Product Type: Medium Changer Vendor ID: 'BDT ' Product ID: 'ThinStor AutoLdr' Revision: 'T16r' Attached Changer API: No samar 57% amtape samar eject amtape: slot /usr/local/libexec/chg-zd-mtx[3]: not ejected: test: argument expected samar 58% amtape samar device test: argument expected These error being explained (I think) by this output, which I do not understand. samar 60% /usr/local/libexec/chg-zd-mtx -eject /usr/local/libexec/chg-zd-mtx[3]: test: argument expected 0 Drive was not loaded Doubly odd since the only tape is loaded. samar 61% /usr/local/libexec/chg-zd-mtx -info /usr/local/libexec/chg-zd-mtx[15]: test: argument expected 8 1 You get the idea. samar 55% mtx -f /dev/scsi/sc1d4l0 status Storage Changer /dev/scsi/sc1d4l0:1 Drives, 8 Slots ( 0 Import/Export ) Data Transfer Element 0:Full (Storage Element 1 Loaded) Storage Element 1:Empty Storage Element 2:Empty Storage Element 3:Empty Storage Element 4:Empty Storage Element 5:Empty Storage Element 6:Empty Storage Element 7:Empty Storage Element 8:Empty MTX inventory returns without any output, perhaps normal behaviour if the other slots are empty (the users seem to have pillaged the tapes performing their own archives - which is actually a welcome change). thank you, Brian --- Brian R Cuttler [EMAIL PROTECTED] Computer Systems Support (v) 518 486-1697 Wadsworth Center (f) 518 473-6384 NYS Department of Health Help Desk 518 473-0773