Josh, I had the same problem the other day - turns out my initial testing was from root rather than amanda user account and I didn't have access (write access) to all of the files in the amanda config directory.
> Hello Josh, > > > Did you go through the tests in the chg-zd-mtx script? Those should > > confirm that your CHANGER.conf file is good. > > (amanda)@atbackup:/usr/local/etc/amanda/atlab$ chg-zd-mtx -info > 3 7 1 > > (amanda)@atbackup:/usr/local/etc/amanda/atlab$ chg-zd-mtx -reset > /usr/local/libexec/chg-zd-mtx: loadslot: not found > 1 > > (amanda)@atbackup:/usr/local/etc/amanda/atlab$ chg-zd-mtx -slot next > /usr/local/libexec/chg-zd-mtx: loadslot: not found > 4 > > (amanda)@atbackup:/usr/local/etc/amanda/atlab$ chg-zd-mtx -slot current > 3 /dev/rmt/0hn > > > chg-scsi.conf > > # $Date: 2004/03/10 20:39:13 $ > # $Author: amanda $ > # $Source: /usr/local/etc/amanda/atlab/RCS/chg-scsi.conf,v $ > # $Revision: 1.2 $ > > > firstslot=1 #### First storage slot (element) -- required > lastslot=7 #### Last storage slot (element) -- required > cleanslot=8 #### Slot with cleaner tape -- default is "-1" > driveslot=0 #### Drive slot number. Defaults to 0 > autoclean=1 #### Set to '1' or greater to enable > autocleancount=20 #### Number of access before a clean. > havereader=0 #### If you have a barcode reader, set to 1 > offline_before_unload=1 #### Does your robot require a 'mt offline' before > mtx unload? > poll_drive_ready=3 #### Time (seconds) between tests to see if the > tape drive has gone ready > max_drive_wait=120 #### Maximum time (seconds) to wait for the tape > drive to become ready > initial_poll_delay=3 #### initial delay after load before polling for > readiness > > > ugh, tests 2 and 3 fail - I could have sworn this was working the other > day.... > Guess I need to find out why "loadslot" isn't found. > > Thanks, > -Ben > >
