#Count 1
#Count 2
# Please replace every ??? with the correct parameter. It is not possible
# to guess everything :-)
# If the option is not needed, cleanmax for example if you have no cleaning
# tape remove the line.
#
number_configs   1   # Number of configs, you can have more than 1 config
                     # if you have for example more than one drive, or you
                     # to split your lib to use different dump levels
                     #
emubarcode       1   # If you drive has no barcode reader this will try
                     # keep an inventory of your tapes to find them faster
                     #
havebarcode      0   # Set this to 1 if you have an library with an installed
                     # barcode reader
                     #
debuglevel       1:0 # For debuging, see the docs /docs/TAPE-CHANGER
                     #
eject            1   # set this to 1 if your drive needs an eject before move
                     #
sleep            7  # How long to wait after an eject command before moving
                     # the tape
                     #
changerdev   /dev/sg4 # This is the device to communicate with the robot
                     #
                     # Here now comes the config for the first tape
config             0 # This value is the one which is used in the amanda
                     # config file to tell the chg-scsi programm which tape
                     # and which slots to use
                     #
#cleancart        ??? # The slot where the cleaning tape is located
                     # remove it if you have no cleaning tape
                     #
drivenum           0 # Which tape drive to use if there are more than one drive
                     #
dev              /dev/nst0 # Which is the raw device to read/write data from the tape
                     # It is important to use the non rewinding tape, like
                     # /dev/nrst0 on linux, /dev/nrsa0 on BSD ....
                     #
scsitapedev   /dev/sg5 # This is the device to communicate with the tape
                     # to get some device stats, not so importatn, and
                     # if you run in problems delete it complete
                     #
startuse          0  # Which is the first slot to use
                     #
enduse            1  # Which is the last slot to use
                     # decrement this value by 1 if you have an
                     # cleaning tape in the last slot
                     #
statfile /etc/amanda/Full/tape0-slot #
cleanfile /etc/amanda/Full/tape0-clean #
usagecount /etc/amanda/Full/tape0-totaltime #
tapestatus /etc/amanda/Full/tape0-tapestatus #
labelfile /etc/amanda/Full/labelfile #
