On Thu, 04 Nov 2004 15:36:05 -0600, Frank Smith <[EMAIL PROTECTED]> wrote: > Maybe, mabe not. Depends on the user/group of the devices and the > user/group Amanda runs as. > Also, while sg is the proper device to use to control the changer, > it doesn't understand tape commands like rewind, so make sure your > tape device is referencing an st device (of course, your kernel > also needs scsi tape support compiled in or the module loaded or you > won't have any st devices).
Okay - well I'm getting conflicting messages here. I had previously been using /dev/nst0 to access the tape drive. That wasn't working, so someone here told me I should use the sg* nodes to access the drive. So that's when I switched to /dev/sg2. I changed the dev entry in chg-scsi.conf back to /dev/nst0 and this is what I'm still getting: [EMAIL PROTECTED] LPD $ amcheck LPD Amanda Tape Server Host Check ----------------------------- Holding disk /dumps/amanda: 36514756 KB disk space available, that's plenty amcheck-server: could not get changer info: could not read result from "/usr/libexec/chg-scsi" -Erik
