The issue is that mtx works fine, giving me an inventory. But chg-scsi gives an error (see below) and amtape (and amlable) also gives an error. I
am cd'd to /etc/amanda/dslnet-hrn/ when running the commands so both the amanda.conf and the chg-scsi.conf files are available.
Any suggestions? How do I go about finding the issue?
Thanks -Nick
-bash-2.05b$ /usr/sbin/mtx -f /dev/sg0 status
Storage Changer /dev/sg0:2 Drives, 31 Slots ( 0 Import/Export )
Data Transfer Element 0:Empty
Data Transfer Element 1:Empty
Storage Element 1:Full
Storage Element 2:Full :VolumeTag=EX1060
Storage Element 3:Full :VolumeTag=SF4069
Storage Element 4:Full :VolumeTag=EX1189
<snip rest>-bash-2.05b$ /usr/sbin/amtape dslnet-hrn show
amtape: could not get changer info: check your config and use a config file for chg-scsi
-bash-2.05b$ /usr/lib/amanda/chg-scsi -info
please check your config and use a config file for chg-scsi
-bash-2.05b$ /usr/sbin/amlabel dslnet-hrn ExaByte230-00 slot 1
amlabel: could not load slot "1": check your config and use a config file for chg-scsi
amanda.conf lines: tpchanger "chg-scsi" # the tape-changer glue script changerfile "/etc/amanda/dslnet-hrn/chg-scsi.conf"
chg-scsi.conf: (generated from chg-scsi -genconf)
number_configs 1 # Number of configs, you can have more than 1 emubarcode 0 # If you drive has no barcode reader this will try
havebarcode 1 # Set this to 1 if you have an library with an installed
debuglevel 0:0 # For debuging, see the docs /docs/TAPE-CHANGER
eject 1 # set this to 1 if your drive needs an eject before move
sleep 30 # How long to wait after an eject command before changerdev /dev/sg0 # This is the device to communicate with the robot
config 0 # This value is the one which is used in the amanda
drivenum 0 # Which tape drive to use if there are more than one drive
dev /dev/nrst0 # Which is the raw device to read/write data from scsitapedev /dev/sg1 # This is the device to communicate with the tape
startuse 0 # Which is the first slot to use
enduse 31 # Which is the last slot to use
statfile /etc/amanda/dslnet-hrn/tape0-slot #
cleanfile /etc/amanda/dslnet-hrn/tape0-clean #
usagecount /etc/amanda/dslnet-hrn/tape0-totaltime #
tapestatus /etc/amanda/dslnet-hrn/tape0-tapestatus #
labelfile /etc/amanda/dslnet-hrn/labelfile #
