Has anyone successfully used the amverifyrun utility in version 2.5.0p1? When I run it, I get the error message:
changer: got exit: 2 str: <none> Illegal slot: "-1" amtape: could not load slot <none>: Illegal slot: "-1" amtape: could not load slot <none>: Illegal slot: "-1" amtape: pid 11950 finish time Sat Apr 29 22:20:47 2006 Looking at the amverifyrun script, it is grepping through the amdump output looking for a line of the form: taper: slot This worked in 2.4.5p1 because the amdump file contained the following lines: ------ from 2.4.5p1 amdump file ------- ... changer: opening pipe to: /home/amanda/MEGABAK1/libexec/chg-zd-mtx -slot current ... changer: got exit: 0 str: 10 /dev/rmt/0n taper: slot 10: date X label MBK1_34 (new tape) taper: read label `MBK1_34' date `X' taper: wrote label `MBK1_34' date `20060429' driver: result time 2.658 from taper: TAPER-OK ... --------------------------------------- It doesn't seem to work in 2.5p1 because the amdump file contains only the following data following the chg-zd-mtx command: ------ from 2.5.0p1 amdump file ------- ... changer: opening pipe to: /home/amanda/MEGABAK1/libexec/chg-zd-mtx -slot current ... changer: got exit: 0 str: 11 /dev/rmt/0n taper: wrote label `MBK1_35' date `20060429' driver: result time 13.409 from taper: TAPER-OK ... --------------------------------------- To me, it looks like the following lines of output are simply missing from the 2.5.0p1 output: taper: slot 10: date X label MBK1_34 (new tape) taper: read label `MBK1_34' date `X' Given this, it would appear that amverifyrun doesn't have a hope of working properly. Any assistance you can provide would be much appreciated (whether its a solution, a "me too", or "it works fine for me"). Thanks, Sean Walmsley ================================================================= Sean Walmsley [EMAIL PROTECTED] Nuclear Safety Solutions Ltd. 416-592-4608 (V) 416-592-5528 (F) 700 University Ave M/S H04 J19, Toronto, Ontario, M5G 1X6, CANADA
