Craig, I know I posted, and exchanged information on this with others on the list some time ago.
Give me a chance to look in my outbox, or you can check the list archives, and we'll see what we can see. What version of Solaris ? I access the robot as /dev/scsi/changer/c6-something, I recall that it has a unique SCSI id on the bus but a LUN of 0. [Unlike the C2 jukebox, that that is another thread] On Mon, Sep 18, 2006 at 11:48:28AM +1000, Craig Dewick wrote: > > Hi, > > I've got Amanda happily seeing the tape drive itself in the L9, but not > the robotics controller. The L9 is attached to an Sbus 'isp' SCSI card in > the Sparc 20 and it's configured into amanda.conf using the > '/dev/rmt/0lbn' device node (the kernels picks it up as 'st15' during a > reconfiguration boot), and the issue at the moment is working out what is > the correct 'class' string to get the 'sgen' driver to recognise and bind > to the robotics controller. > > I've tried using 'QLGC,isp' and just plain 'isp'. The robotics controller > is SCSI ID # 0 going on what the unit's admin screen tells me. There are > two ISP cards in the machine - one LVD/SE card connecting to a Sun hard > disk array, and the diff scsi one going to the L9. > > Any idea on what the correct 'class' string for the sgen.conf file should > be? > > Thanks, > > Craig. > > -- > Post by Craig Dewick (tm). Web @ "http://lios.apana.org.au/~cdewick";. > Email 2 "[EMAIL PROTECTED]". SunShack @ "http://www.sunshack.org"; > Forums @ "http://www.sunshack.org/phpBB2";. Also Galleries, tech archive, > etc. > Sun Microsystems webring at > "http://n.webring.com/hub?ring=sunmicrosystemsu";. --- Brian R Cuttler [EMAIL PROTECTED] Computer Systems Support (v) 518 486-1697 Wadsworth Center (f) 518 473-6384 NYS Department of Health Help Desk 518 473-0773
