Hello- Thank you for the reply. "Are you *sure* you want your vtapes in /usr/src/amanda ?" No - I'm not sure of anything for sure, I'm just trying to get this running! =) But, have not been successful!
I started with that HOWTO (http://www.amanda.org/docs/howto-filedriver.html), and was told that for testing, they wanted it to write to the harddisk vs. tapes, so I found the other link; how do I know what to parameters to change exactly? Thanks! -jg On Tue, 29 May 2007 21:09:24 +0200 "Stefan G. Weichinger" <[EMAIL PROTECTED]> wrote: > Jeanna Geier schrieb: > > Hi All! > > > > I'm new to Amanda and am trying to configure it for > > tapeless operation using the instructions in the > following > > link: > > http://amanda.sourceforge.net/fom-serve/cache/191.html. > I'm > > down to the labeling in step #5 'Use amlabel to label > the > > tapes'; however, when I run the amlabel command, I get > the > > following error: > > [EMAIL PROTECTED]:/usr/src/amanda-2.5.2/sbin$ amlabel > > DailySet3 DailySet301 slot 1 > > amlabel: could not load slot "1": could not read result > > from "/usr/src/amanda/etc/amanda/DailySet3/chg.disk" > > Are you *sure* you want your vtapes in /usr/src/amanda ? > > Apart from that I recommend the official howto: > > http://www.amanda.org/docs/howto-filedriver.html > > Your changerfile is wrong ... at least ... you dropped a > load of > information here ... > > -- > Stefan G. Weichinger > amanda core team member > mailto: [EMAIL PROTECTED] > pgp: 3C64175D > -- > oops! linux consulting & implementation > http://www.oops.co.at > -- ________________________ Jeanna Geier System Administrator Webteam, Inc. [EMAIL PROTECTED] http://www.webteam.net ------------------------ ph: 608.788.8100 fx: 608.788.6613 tf: 866.788.0023
