Hi folks, I just ran amverify on my most recent amanda run from this past weekend and saw this in the amverify report: ... ** Error detected () amrestore: missing file header block amrestore: WARNING: not at start of tape, file numbers will be offset amrestore: error reading file header: Input/output error amrestore: could not fsf /dev/nst0: Input/output error ** No header 0+0 in 0+0 out [ 5 more of these elided ] Too many errors. Loading next slot...
This happened on at least 2 tapes. Further, when it got to checking that all the chunks were there, I see this: Split dump amanda2._RT.20070817.0 should have 54 total pieces Spanning chunk part 41 is missing! Spanning chunk part 42 is missing! Spanning chunk part 43 is missing! Spanning chunk part 44 is missing! Spanning chunk part 45 is missing! So, I'm fairly confident that this file system was not properly backed up. More disturbing to me though, are the 2 or more tapes which reported "Too many errors". Is this a problem with the tape, the drive, or amanda? And how do I prove which one it is? I'm leaning towards the tapes, but haven't ruled out the drive. I'm currently using Fuji LTO3 tapes with an Overland ARCVault tape library changer containing an HP LTO3 drive. The tapes I'm writing to are brand new, just out of the box, never before been used. Any help or ideas would greatly be appreciated. -- Thanks, Paul
