Le vendredi 29 février 2008, Luc Lalonde a écrit :
> Hello folks,
> 
> I'm finally upgrading from the Amanda v2.4.x series to v2.5.2p1.   My 
> configuration worked fine with the old v2.4.x series...  However, I'm 
> having some strangeness with the new version... in particular with 
> clients that have a primary and secondary ipaddr on the same interface 
> (eth0).   Here's an example:
> 
> 2: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 100
>     link/ether 00:04:23:e0:65:46 brd ff:ff:ff:ff:ff:ff
>     inet 192.168.1.23/26 brd 192.168.1.63 scope global eth0
>     inet 192.168.1.25/26 brd 192.168.1.63 scope global secondary eth0
>     inet6 fe80::204:23ff:fee0:6546/64 scope link
>        valid_lft forever preferred_lft forever
> 
> When I do an "amcheck" on the primary addr (192.168.1.23) , all is 
> fine... However, if I do it with the secondary addr (192.168.1.25), I 
> get this message:
> 
> WARNING: secon-ip: selfcheck request failed: timeout waiting for ACK
> 
> Where, secon-ip is 192.168.1.25.   I did a "tcpdump -A -v -v udp port 
> 10080" and it confirms that the Amanda server is sending a request from 
> the secondary address, but getting an answer from the primary address... 
> and it doesn't seem to like it:
> 
> #### clip ###
> 22:58:30.256184 IP (tos 0x0, ttl  62, id 0, offset 0, flags [DF], proto 
> 17, length: 153) amanda-server.909 > secon-ip.amanda: UDP, length 125
> [EMAIL PROTECTED]>.r...........'`..?.Amanda 2.5 REQ HANDLE 000-00000000 SEQ 
> 1204141709
> #### end clip  ###
> #### clip further down ###
> 23:02:51.877040 IP (tos 0x0, ttl  64, id 0, offset 0, flags [DF], proto 
> 17, length: 119) prim-ip.amanda > amanda-server.577: UDP, length 91
> [EMAIL PROTECTED]@.p.........'`.A.c..Amanda 2.5 REP HANDLE 000-00000000 SEQ 
> 1204602504
> #### end clip  ###
> 
> I'd really like to get this to work... I use the secondary address in a 
> dual-node cluster with Heartbeat-DRBD configuration.  The secondary 
> address is used for failover.
> 

Force the listen address in the relevant xinetd.d file. This will do the 
trick.

-- 
Francis Galiegue, One2team - [EMAIL PROTECTED]
[ATTENTION : CHANGEMENT DE COORDONNÉES !]
+33178945552, +33683877875, http://www.one2team.com
40 avenue Raymond Poincaré - 75116 PARIS

Reply via email to